Compact Tire Truer Dust Collection Case for 1/28 Scale RC Racing

Keep your pit area pristine with this professionally designed Nexx Tire Truer NX-265  enclosure, specifically sized for 1/28 scale RC racing equipment. This precision-engineered case effectively contains tire dust while providing convenient access for maintenance and operation.

Key Features

• Magnetic removable bottom panel for quick dust disposal
• Front-access door for easy tire mounting and adjustment
• Compatibility with both single and dual Nexx Tire Truer
• Strategically placed power cable port and switch access
• Durable and compact construction

Technical Specifications

• Width: 4 3/8 inches (111 mm)
• Depth: 4-7/16 inches (96 mm)
• Height: 2 7/8 inches (73 mm)
• Compatible with Nexx Tire Truer 
• Enclosed design for maximum dust containment

Maintenance

• Tool-free bottom panel removal for cleaning
• Smooth interior surfaces prevent dust accumulation
• Compatible with compressed air cleaning
• Washable with mild soap and water

Installation Notes

• Ensure proper ventilation during use
• Place on level, stable surface
• Verify power cable routing before operation
• Regular cleaning recommended for optimal performance

This case is an essential addition to any 1/28 scale RC racing pit setup, combining practical functionality with professional-grade dust management.

Carbon Fiber Front Wing for Reflex FX28 1/28 F1

Upgrade your Reflex Racing FX28 F1 with a CNC-cut carbon fiber and 3D-printed front wing designed for improved performance, durability, and race-legal compliance. Each kit includes all necessary screws for assembly (some OEM screws will be reused).

V2 Update (PNWC Legal)

The new V2 front wing is now approved under PNWC rules.
It features:

• A printed bottom plate with a 2mm lip around the carbon fiber, as required by PNWC.

• Same overall dimensions as the original wing.

Key Features

• CNC-cut carbon fiber construction for strength and precision

• Redesigned side plates that reduce the chance of getting stuck under RCP rails

• No OEM-style “fish hooks”—easier and quicker to marshal

• Includes two optional downforce add-on pieces

• Similar overall dimensions to the OEM wing

• Weight:

  • ~4g heavier than stock (without add-ons)

  • ~6g heavier than stock (with add-ons)

Installation Instructions

1. Seal the carbon edges
   Apply a thin bead of CA glue around the outer carbon fiber edge to prevent splintering.

2. PNWC Legal Bottom Plate (Required for PNWC)
   Skip this step only if your ruleset allows exposed carbon fiber.

   • 2a. Apply a small amount of Shoe Goo, Gorilla Glue, or similar removable glue to the nose of the printed bottom plate.

   • 2b. Insert the carbon fiber plate into the printed bottom plate. Ensure it snaps fully into place and sits flat and flush along all edges.

   • 2c. Allow glue to fully cure before racing.

3. Assembly
   Use the included countersunk screws to secure the printed pieces to the carbon fiber plate.

4. Mounting to Chassis
   Installs the same way as the OEM wing using original hardware and the small CF top piece.

5. Note on OEM Short Screw
   The OEM short screw near the body post can be left out—there is no threaded insert for it on this wing.

Fitment Notice

If your FX28 has aftermarket components, fitment may vary. There are many combinations of parts, and not all can be tested.

Durability Disclaimer

These wings are stronger than OEM plastic, but not indestructible.
Hard impacts or specific angles may still cause breakage.
Use at your own discretion—no component can guarantee complete protection.

Compact Tire Truer Dust Collection Case – For 1/28 Scale RC Racing

Keep your pit area clean and professional with this precision-designed dust enclosure for 1/28 scale tire truers. Engineered for hobbyists and racers who value performance and cleanliness, this case effectively contains debris while allowing full access for tire truing and adjustments.

✅ Key Features:

• Magnetic removable bottom panel – Quick and easy dust disposal

• Front-access door – Convenient tire mounting and adjustments

• Universal fit – Works with single and dual PN tire truers (V2 & V3)

• Power cable port + switch cutout – Smart layout for easy setup

• Compact and durable – Built tough without taking up space

📏 Technical Specs:

• Width: 4-3/8 in (111.13 mm)

• Length: 4-7/16 in (112.71 mm)

• Height: 3 in (76.2 mm)

• Fits: PN Racing V2 & V3 tire truers (single & dual)

• Enclosed design – Maximizes dust containment

🧼 Easy Maintenance:

• Tool-free bottom panel removal

• Smooth interior – No dust buildup

• Compatible with compressed air cleaning

• Washable with mild soap & water

🔧 Installation Tips:

• Use on a level, stable surface

• Ensure proper ventilation

• Check cable routing before use

• Clean regularly for best performance

This dust collection case is a must-have for any serious 1/28 scale RC racing setup. It combines clean design, rugged performance, and race-ready convenience—all in one compact enclosure.

These Fence Posts are purpose-built for encircling RCP foam tracks both 50cm and 30cm versions.  Designed to accommodate wire mesh readily available at hardware stores, they facilitate the construction of a protective barrier around the perimeter of the track.  Ideal for elevated tracks, they also serve effectively on any track in high-speed corners to ensure cars remain on course.

Compatible with rail pegs for RCP, a set of 10 posts will effectively enclose 5 straight tiles. Determining the required quantity is straightforward: simply tally the number of pegs along the perimeter of the desired area, matching it to the quantity of posts needed for installation.

Includes:

• 10 Fence Posts and screws necessary for assembly.

Requires:

• Mesh from a hardware store, similar to the type used for screen doors and screen patios. The plastic variety is recommended for its ease of customization; it can be cut to the desired length without unraveling, unlike metal mesh options.

Featured at RC Hobby in Fuquay Varina NC, BPCS Hobbies in West End NC, and RC Hobby Nook in Smithfield NC.

Please Read all Description before purchase!

Front Bumper Wing and Rear Wing for GLR-F1 GLRF1 GLR F1 Mini Race Car

These are 3D Printed front and rear wings for the GLR-F1 to help protect the front steering components and provide better downforce.  

The front and rear wings are sold separately!  If you want a set please add the front wing to your cart and then the rear wing to your cart before checkout, and it should combine shipping as well.

Front Wing:  Comes with screws for assembly (some oem ones will be reused from the original wing), plastic bushings, and parts.  You can use metal bearings if you want it to roll a little smooth and/or add a little weight to the front.

Rear Wing:  Comes with screws for assembly (some oem ones will be reused from the original wing).  The upper wing is adjustable to adjust downforce.

COLORS:

The color you pick will be the Primary/Secondary.  For example. if you pick Black/White, the largest part of the wing will be Black, the smaller parts will be White.  Be sure you pick the color combination you want.

If you pick Custom/Custom, please contact me to verify i have the colors you want.  I have more than 30 different colors typically to choose from.

If any aftermarket components have been added to your GLR-F1 I can't guarantee fitment, i can't test all combinations of aftermarket parts.

These parts are NOT indestructible.  They stand up to a decent amount of banging but they won't stand up to abuse or horrible driving if you like to run head first into other cars.

Please use these at your own discretion, they are NOT a guarantee to prevent breakage, if you hit anything hard enough or at the right angle you will break something, these bumpers are simply made to provide a little protection.

I stand by my work 100%, I will do what I can to make it right if something isn't 100%, this is a hobby for me just like it is for you so I want everyone to be able to enjoy it.

NOTES: 

See the pictures for details, nothing in the photos are included other than the wing kit.

These items can warp and melt in hot sun or left in hot places like a car or attic, use caution!

Note: none of these are guaranteed to prevent breakage, but they should offer more protection than completely exposed components.

These are washers for RCP Foam Track.  they prevent the connectors from pulling up / down through the foam.  They also allow them the screw in a little tighter.

Used at RC Underground Arena for both the 2023 Race of Champions and 2023 PNWC Regional races.

What's included:  each pack is for 10 washers.

These are custom braces for RCP foam track systems.  They fit between two parallel lanes to prevent them from move closer or further apart and shifting side to side.  Enough of them will prevent large or small tracks from shifting too much and maintain the integrity of the race surface.

Used at RC Underground Arena for both the 2023 Race of Champions and 2023 PNWC Regional races.

What's included:  each pack is for 2 Gap Braces, please note they are specific to either 50cm or 30cm tiles.  All braces come in Red.

These are Rail Braces for RCP Foam Track.  They prevent the rails from lifting during hard impacts.  Especially useful on fast inside turns (50cm) and key locations around the track where cars are more likely to hit the rails at high speeds.  They have a hole that allows a screw to be placed in it to ensure it stays in place even during the hardest hits.  I recommend a drywall screw or something similar that is narrow with thick threads.

Used at RC Underground Arena for both the 2023 Race of Champions and 2023 PNWC Regional races.

What's included:  each pack is for 4 Rail Clamps.