NX-576 Aluminum Front Strut Bar – Built for Control. Tuned for Victory.
Stiffen your front end. Sharpen your performance.

Take your RC28 to the next level with the NX-576 Aluminum Front Strut Bar from Nexx Racing. Precision-machined from premium 7075 aluminum, this upgrade delivers maximum strength with minimal weight—just what serious racers need.

Designed to reduce chassis flex during high-speed cornering, the NX-576 keeps your car planted and stable, enhancing both balance and confidence through every turn. The result? Faster corner entry, smoother transitions, and predictable handling lap after lap.

More than just a brace—it’s a race-tuned performance upgrade that brings sharper steering response and tighter line control to your RC28.

⚙️ Key Features

• ✅ Premium 7075 Aluminum Construction
  Strong, lightweight, and built to handle competitive racing conditions.

• ✅ Enhanced Chassis Stability
  Reduces flex for better balance and grip through high-speed corners.

• ✅ Sharper Steering Response
  Delivers precise, predictable handling—perfect for holding tight racing lines.

Lightweight. Strong. Race-Ready.
The NX-576 front strut bar is your ticket to faster laps and tighter control.

NX-572 Steering Knuckle Set – Precision. Strength. Control.
Upgrade your RC28’s handling and dominate every corner.

Take control of every apex with the NX-572 Steering Knuckle Set, the ultimate performance upgrade for serious RC28 racers. Machined from premium 7075 aluminum, these knuckles deliver unmatched durability and precision without adding unnecessary weight.

Engineered with optional Ackermann mounting points, the NX-572 gives you the flexibility to dial in your steering geometry—perfect for adjusting to different track conditions and driving styles.

Whether you need sharper turn-in or smoother cornering stability, this race-ready upgrade puts you in control, lap after lap.

🔧 Key Features

• ✅ 7075 Aluminum Construction
  Ultra-strong and lightweight—perfect for high-stress racing environments.

• ✅ Optional Ackermann Mounting Points
  Customize your steering geometry for maximum cornering performance and track adaptability.

• ✅ Precision-Engineered Design
  Built for consistent, high-performance handling with superior strength and responsiveness.

Affordable. Reliable. Race-Ready.
The NX-572 isn’t just an upgrade—it’s the edge that separates fast cars from winning cars.

Elevate your RC28’s handling precision with the NX-577 Side Damper Spring Set. Featuring three distinct spring rates, this kit puts full chassis tuning right at your fingertips—whether you’re pushing for razor-sharp cornering or leaning into high-speed stability.

Easily swapped chassis dynamics let you dial in the setup that fits the track and your driving style:

• Need snappier responsiveness in tight technical sections? Swap in the stiffer spring.
• Facing sweeping high-speed turns? Reach for the softer spring for improved stability.

Track adaptability at your control—the NX-577 is the fine-tuning upgrade every serious RC28 racer needs for unrivaled handling consistency.

Key Features:

• ✅ Includes 3 Different Springs — Tailor chassis flexibility to any track condition.
• ✅ Adjustable Chassis Tuning — Easily shift between sharper cornering and added stability.
• ✅ Precision Control Upgrade — A must-have for racers targeting full setup mastery.

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.

Tri Damper System for NX-262 Motor Mount, NX-247 and NX-248 Gimbal Motor Mount.

ONLY for NX-262 98-102mm MM Motor Mount

Packing :

2 x Side Damper

1 x Side Damper mount

2 x M2x3 Button Hex Head Screw

2 x M2x5 Set Screw

2 x 2x4x1 Aluminum spacer

Requires:

NX-262 98-102mm MM Motor Mount, NX-247 PN2.5 gimbal motor mount , NX-248 MR03 gimbal motor mount.

NX-130 to NX134 center shock ( depend on color).

NX-151 damper springs set, NX-021 carbon damper disk.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

V-LINE-FULL MANUAL

NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.

COLOR: RED

V-LINE SUSPENSION SYSTEM FEATURES

• V- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·
• Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·
• Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·
• Adjustable camber from 0-3⁰ degrees with 4 position eccentric shaft with easy operation·
• Quick adjustable caster by caster bar from 0-1.9⁰ ·
• Both 0⁰ and 1⁰ lower A arms provided to facilitate suspension setup·
• Ride height adjustment with turn of a screw·
• All 3 tie rods 0⁰, 0.5⁰, 1⁰ included ·
• High quality Precision CNC Swiss 7075 aluminum

V-LINE-FULL MANUAL

NEXX RACING V-line Front Suspension system is designed with innovative features such as quick adjustable caster, quick adjustable camber, adjustable ride height…. It makes the Mini-Z looks much like a real car, not only fast but also stable, better cornering and better suspension overall. With locknuts and kingpins, V-LINE is designed to minimize most of the play resulting very smooth performance. The V-LINE suspension systems fits only Mini-Z MR03 wide base models and also fits PN 2.5 Chassis. For easy assembly, we pre-install the V-LINE suspension system at factory so it’s very easy and fast to assembly it on the Mini-Z.

COLOR: ORANGE

V-LINE SUSPENSION SYSTEM FEATURES

• V- line suspension is designed with 2 V-shaped suspension forks to bring you a cool suspension system·
• Same width as stock. (MR02/ MR03 PNR2.5W Chassis width)·
• Suspension movement use ball joints instead of sliding knuckle and locknut easy adjustment play between knuckle and upper arm make joints will not pop out even during hard collision.·
• Adjustable camber from 0-3⁰ degrees with 4 position eccentric shaft with easy operation·
• Quick adjustable caster by caster bar from 0-1.9⁰ ·
• Both 0⁰ and 1⁰ lower A arms provided to facilitate suspension setup·
• Ride height adjustment with turn of a screw·
• All 3 tie rods 0⁰, 0.5⁰, 1⁰ included ·
• High quality Precision CNC Swiss 7075 aluminum

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment.
DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the miniZ more stable in any action.