GL-0162-GLA-P

Compatible with GL-0162-TG only

MR2046A

RXC52-SA Micro Surface Receiver

The first micro surface receiver with an antenna-less design that integrates a transponder with an editable personal ID number.

Unlock Options:

• Pay to unlock the editable ID feature
• Unlocking requires the MX USB PG-ISP compiler (sold separately)
• Alternatively, purchase the RXC52 receiver with pre-unlocked TP functionality

Compatible with Sanwa Transmitters:

• Sanwa M17
• Sanwa M12 / M12S
• Sanwa MT44
• Sanwa MT4 / MT4S

MXO DECLARATION:

1. The RXC52 series receivers are original products, not copies or counterfeit versions of other manufacturers
2. MXO-RF and CROSSOVER-RX brands guarantee high quality and ongoing technical support

ZSAXL-33

Universal Zero Slop axles. get rid of the gap between the inner bearing ID and the OD of the axle.

On some cars this clearance can alter your camber by 1-2 degrees

Will fit GL, Atomic, Reflex and many others

Comes with extra O-Rings

Finally here! MWX S Spec batteries are designed around the stock classes and offer the lowest IRs on the market today! lower the IR means the faster and more powerful the battery is. 

Features:

• high flow wires
• black ,black, red colored wires
• low IR (internal resistance)
• great looks!
• for best results DO NOT CHARGE OR DISCHARGE HIGHER THAN 1.5A, ANYTHING HIGHER THAN THIS WILL INCREASE THE IR AND DE STABILIZE THE BATTERY

ASPEC-V1

Features:

*Weight , the MWX chassis is lighter than the GL brass chassis and since most folks run this chassis in stock and super stock, the heavy weight of the car naturally makes a difference. I basically shifted the weight into better positions to stabilize the handling while calming down the steering making the chassis wide everywhere is not optimal. High level competition has taught me this.

*Due to the slightly heavier servo the car requires, I offset some of that Weight with a cutout under the servo.

*Each chassis also comes with the infamous FPM (floating pod mount). to further enhance handling.

*Coming soon will be the A spec conversion kit to allow for a GT or GLR pod so you can use 14mm rears and a gear diff!

PODCARB-V1

R1-SC9-400

Kit includes:

Front bumper

R1 specific side clips

Wing mount

Carbon wing

R1-ZS-013

If you are using the ZS axles and ZS knuckles these plates are designed to compensate for the slop elimination

R1-ZS-016

Red anodized aluminum knuckles for your R.1. not only are these more durable but they are also part of the ZS series. the Orings seat inside the knuckles.. this cuts down on slop and it also seals the damping grease inside

Because of the slop being removed it is recommended to purchase the "ZS" camber plates which have been designed for the axle and knuckle slop being removed.

R1-ZS-012

If you are using the ZS axles and ZS knuckles these plates are designed to compensate for the slop elimination

ARM2023V1

TROD

STASS-23v1

(4) Spring perch hat washers

R1SH401

-Replacement shock plastics for your R.1

SHKMT-RW-V1