RAD007

RAD003

Inspired by the current fastest production hyper car at the Nurburgring, the Catfish is Rad Body's Second Foray into GT Bodies. Having mellower initial steering but higher corner speed than the Mako and Mako X, the Catfish has a very neutral and easy to drive feel. While perhaps not as quick around tighter corners, the increased stability and higher corner speed makes this body shine in higher bite and higher speed corners.

R246-1042

R246-1041

700385

These batteries have a high voltage level under load, with low internal resistance.

Designed for use with 1/28 scale car

Atomic - BZ AMZ FFZ MRZ SZ

GL Racing - GLA GLR GLRGT GLF GLD

RTRC Chassis

Specification

Voltage: 7.4V (2S)

Capacity: 385mAh

Recommend Charge Rate: 0.8A

C-rate: 70C

Cable: 24Awg

Plug: JST-PH

Type: Rectangular

Size: 44.8 x 20 x 11.9mm (Length x Width x Height)

Weight: 19.5g

GLR-006

600813

Jomurema Authorized Product

PN Lexan Body Kit 600800K for Mini-Z MR03 and PN 2.5 Chassis

Configurable for 98mm wheelbase.

The body comes unpainted.

0.7mm Version

Requirement:

Kyosho Mini-Z MR-02, MR-03 or PN 2.5W chassis

1/28 2WD, AWD Chassis e.g. GL Atomic

800500

MR2055PC53

164435

NEW V4 Version 

Motor Can

- the all new motor can has bigger and more ventilation holes allowing better heat dispersion thus providing better run time

- front section has evenly spaced mounting screws holes that is compatible and fits for all after market motor holder and chassis 

End Cap

- newly designed end cap now comes with side locking screws that firmly secures the end cap and PCB.

Stator

- high temp wires used for longevity

- proprietary wiring producing better speed, torque and smoothness

Changeable armature

New design air vent gets more cooling

High-Temperature wire

15mm diameter motor can, same as normal brushed 130 motors. Fits in all Kyosho, PN, and aftermarket motor mounts.

Fits in all Mini-Z chassis AWD, F1, MR02, MR03, MR04

Much more torque and acceleration than other VE motors.

No loading RPM 22000 on 4.8V, amp draw only 0.28A

Four mounting holes to allow different angles of motor terminals.

Eight venting holes prevent heat buildup.

Can and end bell ball bearing from Japan.

Recommend gear ratio 3.95 to 5.00 

Connection M1 to Orange Wire, M2 to Yellow Wire, M3 to Blue Wire

Recommend wire #700122 

Replacement endbell screws #183002

700511A

700506A

700505A

PN lexan roof have a thickness of 0.2mm.

Molded from the original plastic window ensure perfect fitment.

Lexan window is thinner and lighter compared to the original plastic part which reduced weight from the top of the car and shifts the center of gravity down for better stability.

Requirement:

JOMUREMA GT01 Body

Color: Clear

Material: Lexan

Includes:

1 x lexan window uncut.

1 x Window mask

PN Racing Mini-Z Precision Gear Differential

Parts Number MR2055M is M0.5 43T

Parts Number MR2055P is 64P 53T

•Light weight. Minimal rotational inertia for fast acceleration.

•Axle has been revised to 3mm (both side uses same size bearing/bushing now)

•Fast gear ratio changes. No dis-assembly of differential necessary for spur gear change.

•Adjustable side gear tension for tight or loose differential action.

Smooth quiet operation. No gear noise and vibration associated with stock differential

Changing Spur Gear Ratio

1. Loosen Tension Nut to separate side gears.

2. Allow spider gear pins to recess into carrier. Depress with screw driver if necessary as shown by arrows.

3. Remove spur gear.

4. Installation is reverse of removal

600800E

600810