RX28A-19

These 0.3mm caster shims can be used in combination with a 0.2mm shim to reduce the slop in your front end. Due to tolerance, sometimes a 0.2 with a 0.3 allows for less movement on the upper arms. The difference in caster is negligible, but we recommend using the towards the back.

RX533

Sturdy, good looking and lightweight, this bumper is perfect to mount the Rad Body Ocho Pan Car body. Compatible with our RX53Weight Balance Set.

RX28A-16

0.2mm laser cut caster shims to fine tune your caster in 2 degree increments.

RX28A-18

RX28A-34

The all new 102mm wheelbase conversion kit fits all your flat plate versions of the RX28 release to date. It is designed to allow you to mount 102mm bodies like the Mazda 787B on the car for a more versatile experience (Kiss front end needs slight clearance sanded around upper arm area). The chassis was designed with versatility and light weight in mind. You can now use a larger 24mm battery or move the battery on the chassis forward by 4mm to fine tune your weight bias through the included extra holes on the chassis and battery stop.

The kit includes:

-RX28 102mm Hardened Steel Plate Chassis with Light Weight Cuts

-4mm Shock Cap Extender post and 1mm shim

-Battery Stop Post and Screw

-Body Side Clips (Tested on Maxda 787B only so far)

MTS10001

SET YOUR TWEAK WITH THE MINI-Z TWEAK STATION!

USER GUIDE: https://minitweakstation.com/wp-content/uploads/2023/04/Mini-Tweak-Station-User-Guide.pdf

RX534 

The Reflex Racing mass damper set is designed to smooth out your 1/28 scale car by reducing the amplitude of vibration on the front end caused by the uneven nature of RCP Tracks. The mass damper is mounted on the ballast weight hole on any Reflex Racing carbon bumper or on the body clip posts of your RX511 Jomurema bumper. The result is a car that is smoother to drive and more controllable at high speed and through bumpy sections. Adjust the damper by using a different combination of weights.

Contents

• 3x 0.9g Tungsten Weights
• 1x 4mm aluminum post
• 2x M2x3 CS Screws

RX528

RX541

This bumper was developed to be in compliance with the 2024 PNWC Bumper Rules. The new requires there to be a 2mm gap between bumper and body if the bumper is made out of CF. This bumper retains the same shape as the RX528 Mako Bumper, but also has a nested, front TPU liner which satisfies the rule as the leading edge is now made from flexible, rubber like material (albeit, still super rigid).

This bumper is slightly heavier, but not by much. We recommend using CA to attach the bumper more securely to the CF part.

RX529

Sturdy, good looking and lightweight, this bumper is perfect to mount to Longer Nose GT Bodies like the Marka RK-W

This is our interpretation of a Racing Body. Developed over the last 6 months to provide more stability, downforce and steering so that your 1/28 scale car car run faster, more consistent laps. The smooth design of the front pontoons helps the body slide off of walls, preventing hang ups on RCP Track.

This listing includes an RX520 GT Front Bumper, 4 Body Posts, 8 body clips and hardware. Bodies include double window masks, sticker sheet with lights and details plus wing mounting hardware.

This is our interpretation of a Racing Body. Developed over the last 6 months to provide more stability, downforce and steering so that your 1/28 scale car car run faster, more consistent laps. The smooth design of the front pontoons helps the body slide off of walls, preventing hang ups on RCP Track.

This listing has only the body. We recommend using our GT Bumper (RX520)

RX515V4 

What makes the Reflex Ball Diff Special? Attention to details. We worked on sourcing the highest quality materials and ended up with a light weight ball diff that has better engagement and acceleration.  

The ball diff comes standard with super hard steel diff rings, 7075 T6 aluminum diff shaft, carbide diff balls, hard o-ring for tighter adjustment, our specially designed 10 ball spur gear and lightweight 7075 aluminum shaft and diff parts. The V4 diff now also comes with a molded spur and spur gear covers. The spur gear is super durable, quieter and much longer lasting. The covers are now about 50% lighter than the aluminum variants, which gets the weight down to a scant 6.6g with covers and 5.8g without (including the left hub).

Instructions -https://www.reflexracing.net/assets/images/Reflex%20Racing%20V2%20Ball%20Diff.pdf?rdm=BFC5F24445B0

RRE020 

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RRE021

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RX514V2

All New for Reflex is the GL Racing GLR 514V2 Stainless Steel Chassis. More forward weight bias for better stability and less traction rolling. Black slick coating and chamfered edges for less friction on the track when bottoming out and rolling on RCP.

This V2 Chassis is made from Coated Stainless Steel, which is stiffer than brass and in turn makes the car stay flatter and traction roll less. It is also much tougher and is almost impossible to bend, so your car should run completely tweak free!

RXGL-KIT 

This is a comprehensive conversion kit designed to make your Giulia Leaner, faster and more durable. This conversion kit makes your Giulia, RTR around 165-175g, depending on other miscellaneous parts, body and electronics selection. It is designed to be used with the smaller, 8.5mm tall servos like the Reflex Racing RRE007.

The kit includes:

Hardcoated Stainless Steel Main Chassis

7075 T6 Aluminum Motor Mount, Servo mount, Center Shaft and Battery Hold Down System

CF Shock Towers, Top Deck, battery hold down tabs and HW motor, motor mount Spacer

Adjustable F/R Shocks and Front Springs (you will use the std front springs in the rear to start)

Delrin Servo Horn

Necessary Hardware for Installation

*car images show prototype, some items, such as springs can vary.

Link to Instructions - https://www.reflexracing.net/assets/images/Giulia_Conversion_kit.pdf?rdm=978EEBBE85B0

RX544

Stronger Titanium Shaft for your Gear Differential.