RX28A-35

These springs are in the same dimensions as the RX28 Double A Arm Front Springs. They are stiffer than the Gold springs and are good for Lower Roll Center Set Ups (when removing shims under the knuckle). These springs are also meant to be used in the rear of your Giulia Conversion kit from Reflex Racing.

The order of stiffness from less to most is :     GOLD>>>ORANGE>>>BLUE>>>RED

RX28-UKIT

Updated kit to bring your RX28 Gen 1 car to Gen 2 spec.

This kit includes all the critical update parts included in the new Generation cars. It includes:

-RX28A-20 Reflex Racing RX28 30g Steel Chassis Plate and SE Style steering CF plate

-RX28-045G2 RX28 G2 Medium A Arm Set

-RX28-052 RX28 Gen 2 Motor Mount

-RX28-050 RX28 Gen 2 Molded Center Pivot

-RX28-049 RX28 Gen 2 Molded Side Links

RX28A-33-SS

RX28A-33-HS

RX28K-UKIT

Updated kit to bring your RX28K Gen 1 car to Gen 2 spec.

This kit includes all the critical update parts included in the new Generation cars. It includes:

-RX28A-20 Reflex Racing RX28 30g Steel Chassis Plate and SE Style steering CF plate

-RX28-052 RX28 Gen 2 Motor Mount

-RX28-050 RX28 Gen 2 Molded Center Pivot

-RX28-049 RX28 Gen 2 Molded Side Links

RX28-054

RX28-045G2-1

G2 molded A-Arms for your RX28. Includes left and right dedicated arms.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

RX28-046G2

Version 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling. This listing includes the new Gen2 dedicated left and right arms.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

-4 x 3.55mm Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws

RX28-045G2

Version 2 molded A-Arms for your RX28. This is the G2 arm sets with dedicated left and right arms.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

-4 x 3.55 Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws

RX28A-37

These springs are in the same dimensions as the RX28 Double A Arm Front Springs. They are stiffer than the Gold springs and are good for Lower Roll Center Set Ups (when removing shims under the knuckle). These springs are also meant to be used in the rear of your Giulia Conversion kit from Reflex Racing.

The order of stiffness from less to most is :     GOLD>>>ORANGE>>>BLUE>>>RED

RX28A-36

These springs are in the same dimensions as the RX28 Double A Arm Front Springs. They are stiffer than the Gold springs and are good for Lower Roll Center Set Ups (when removing shims under the knuckle). These springs are also meant to be used in the rear of your Giulia Conversion kit from Reflex Racing.

The order of stiffness from less to most is :     GOLD>>>ORANGE>>>BLUE>>>RED

RX28-028

RX28A-28 

l-New 7075-T6 Adjustable Aluminum Upper Arms from Reflex Racing Allow you to fine tune the camber in the front of your RX28. Compatible with all cars, these arms use a turnbuckle and ball cup to adjust the camber of your car to suit track conditions.  

https://youtu.be/Jk_fJgMrN6Y

RX28A-59

Our Center shock is designed to be easy to adjust, light weight and lower maintenance than your "average" shock. The shock is made with premium components such as hard coated 7075 T6 Alloy Main Body and Titanium Nitride Coated Main Shaft.

With this shock design, droop can be adjusted by turning the lower spring perch or shock cap. Additionally, the enclosed grease chamber allows for longer time in between re-builds.

This main damper should work not only with our RX28 Kits, but also with the majority of 1/28 scale chassis out there.

The shock set comes with all 3 spring options (Black-soft, Silver-Medium, Gold-Hard).

We recommend Kyosho 30,000 grease inside the shock.

RX28A-29

Go longer between re-builds with these dust covers for your ball diff. Compatible only with the Reflex Racing V3 Spurs and beyond, these dust covers should work on the majority of diffs out there when using a Version 3 and beyond ball diff spur.

The set of dust covers adds about 1.6g of weight to the diff.

RX28-019

Replacement 3.5MM Ball Cups

RX28-051

RX28-068