RX28SE-08

This all new chassis for your RX28SE Gen 2 changes the battery and shock mounting system slightly so that we can have more space to move the 340mah hardcase lipo fore and aft on the chassis, as well as allowing for our new 400mah LiHv battery to fit in the chassis in 98mm configuration. This chassis also sheds approximately 5-6g off of the chassis in higher areas ensuring that while the chassis gets lighter, the center of gravity does not suffer. The kit is finished off with a new forward center shock mount that incorporates a band-less battery hold down that is more reliable and easier to use.

RX28K-KITG2 (New Old Stock) Never been opened and or used. Rare Find!

RX28-057

Refresh Set of plastics for your RX28G2 Double A-Arm cars ( STD and SE).

Included:

-2x FRP Adjustable Upper Arms

-2x Damper Tubes

-2x Left Rear Wheel Nuts

-4x Wheel Nuts

-12x 2mm Ball Cups

RX28-058

Update Set of plastics for your RX28G2 Double A-Arm cars ( STD and SE).

Included:

-2x FRP Adjustable Upper Arms

-2x Damper Tubes

-2x Left Rear Wheel Nuts

-4x Wheel Nuts

-12x 2mm Ball Cups

-2x G2 Hardened Steel Adjustable Arm Turnbuckles

-2x G2 Hardened Steel Steering Turnbuckles

-2x G2 Damper Pistons

RX28-044

Replacement 2mm Turnbuckles and Ballcups to use with your RX28G2 FRP Adjustable Upper Arms. Must buy these to use the included arms in the RX28G2 kit.

RX28-042

New G2 Ball Cups made for 2mm threads.

**Must be used with the RX28A-33 Shock, New G2 Turnbuckles and Side Dampers.

RX28A-39

All New RX28 Steel Chassis for your RX28G2 Plate Cars. This new chassis allow for fore and aft movement of 20mm wide batteries as well as making it compatible with our new 400mah batteries that are 24mm wide. This new chassis kit comes with lateral CF braces to locate the battery side to side, but also to stiffen the front to back structure of the car for more precise handling and higher corner speeds. The kit is finished off with a new forward center shock mount that incorporates a band-less battery hold down that is more reliable and easier to use.

RX28A-30

Go longer between re-builds with these dust covers for your ball diff. Compatible only with the Reflex Racing V3 Spurs and beyond, these dust covers should work on the majority of diffs out there when using a Version 3 and beyond ball diff spur.

The covers add about 1.6g of weight to your diff.

RX28-046-1

Version 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

RX28A-23

These springs are now gray to make them easier to identify.

RX28A-24

Use the linear springs for smoother response. This Green Spring is a similar to the RX28A-06 Soft Center Spring but is more linear.

RX28A-06

RX28-034

RX28A-41 

This short steering horn is designed for high traction applications where your car is too edgy and you are looking for a slower steering feel. It is ideal for Pan Car and larger flowing tracks where you do not need as much steering throw. Due to the design of the shorter horn, you will only be able to achieve about 80% of the previous steering throw, so if you are using 85%+ Dual Rate, this is probably not the horn you want to use.  

RX28A-15

Optional Rear Upper Shock Mount. Allows for easy adjustment of the shock position. More forward provides more body roll and smoother steering. More Rearward is more aggressive and more forward traction.

RX28A-01

This option rear pod plate is about 4g heavier than the stock one. It allows the rear end to be a little more stable and removes a little bit of rotation. We typically like to use this in Pan Car and Lexan classes, but it can be helpful in plastic body classes in low to mid traction conditions.

RX28-049

These Gen 2 side links are stronger and smoother than the original Delrin items. Compatible with all RX28 Kits.