MRK-8023-07

Does not come painted! Is a clear Body

Silver Horse RC Transmitter Bag

Silver Horse RC Transmitter Bag Store safe. Travel smart. Saddle up.

Your transmitter could be the most expensive thing you'll touch all weekend. Treat it like it.

The Silver Horse RC Transmitter Bag is built to keep your radio safe from the bumps, drops, and chaos of race-day travel. Padded stall walls absorb impact, and two internal dividers let you customize the fit around your transmitter — or double up as extra cushioning for a tighter, more protective pack. Heavy-duty zippers and reinforced carry points mean this bag holds up trip after trip, season after season.

Whether you run wheel or stick, it's a first-class stall for the gear that runs your steed.

Features:

• Padded stall walls shield your transmitter from impact and travel wear
• Two internal dividers — use as compartment separators or stack for extra padding
• Adjustable, removable shoulder strap for hands-free carry
• Dual top carry handles for grab-and-go convenience
• Heavy-duty zipper with red piping accent
• Clear interior pocket for cables and small items
• Branded Silver Horse RC panel

Internal Dimensions: 8.5″ H × 6.5″ W × 6″ D

Pairs with the Silver Horse Backpack for a complete RC travel solution — bring the whole stable with you. (Backpack sold separately.)

Adjustable Slipper Spool

This solid axle spool features an adjustable spur gear slipper system, allowing fine tuning of how much rotation you want from the rear end.

By adjusting the slipper, you can control the car’s behavior on power, improving traction and making the car easier to drive in different conditions.

A simple solution to adapt rear-end rotation to your driving style and track grip.

COLT 25 Low-End Torque Rotor

Gear down for maximum acceleration with this specialized rotor designed for technical racing scenarios. This rotor reduces your motor's KV rating by approximately 80KV from the RS2500 baseline while significantly boosting low-end torque and throttle response.

Ideal Applications:

• Shorter, Technical Tracks - Dominate tight layouts where corner exit speed matters more than top-end velocity
• 180-Degree Hairpins - Power out of sharp turns with authority and leave competitors in the dust
• Open Gearing Events - Take full advantage of gearing freedom to dial in the perfect balance between acceleration and speed

This rotor transforms your COLT 25 into a torque monster that punches hard off the line and through every corner. When the track demands snap over speed, swap in this rotor and feel the difference where it counts most—coming off the turns.

Perfect for racers who know: it's not how fast you're going, it's how fast you're accelerating.

These molded steering knuckles are lighter than the aluminum versions for the RX28.  Lighter knuckles helps increase the response of the front suspension in conditions of high bite.

Black colored arms for your Gen 3 Front End.  Same stiffness as standard, just different color.

These Gen 2 side links are stronger and smoother than the original Delrin items.  Compatible with all RX28 Kits.

MXO Racing MX Nano TRAN Micro Transponder

The MX Nano TRAN is an ultra-compact infrared transponder designed for precision lap timing. Measuring just 11.2 x 8.0 x 3.8mm (including shell), it fits virtually anywhere on the car without compromise. Comes with a black protective case and ESC connector wire. Compatible with EASYLAP timing systems and the MXO Wireless LAP system.

Personal ID is fully programmable with a range of 1–16,777,215. The transponder ships in Random ID mode by default; switching to User ID mode allows a custom ID to be set via the MXO GUI software and MX USB PG-ISP programmer (sold separately).

Works with a wide range of vehicles and receiver setups — power can be drawn from the servo interface of the RXC42-X, the communication port of the MINIZ (MR-03EVO/MR-04EVO), the MINIZ SUPRA, or the servo interface of the RXC42-X (1.5mm 3P).

Specifications

• Dimensions: 11.2 x 8.0 x 3.8mm (including shell)
• Operating voltage: 3.3–8.5V
• Personal ID range: 1–16,777,215
• Compatible systems: EASYLAP, MXO Wireless LAP

IN STOCK!

Introducing the all-new GX28 from Reflex Racing — a purpose-built 1/28 scale racing platform engineered for serious competitors who demand precision, adjustability, and podium-proven performance in a compact package.

Built on the championship-winning DNA of Reflex Racing, the GX28 carries forward the legacy of multiple World Champions and dominant race results across the globe. From our record-setting RX28 series to the groundbreaking FX28 Formula platform, Reflex Racing continues to push the boundaries of 1/28 scale engineering with the same relentless focus on innovation and on-track excellence.

Key Features:

•  Linkless rear end suspension derived directly from the FX28, delivering ultra-smooth operation, reduced slop, and exceptional traction with minimal maintenance.

•  Highly adjustable sliding king pin front end featuring aluminum knuckles with Delrin sleeves for precision and smoothness, paired with an aluminum bulkhead and carbon fiber lower arm for lightweight strength and optimal rigidity.

•  Extremely narrow chassis with an ultra-low center of gravity, optimized for razor-sharp cornering and maximum stability at speed.

•  Compatible with RX28 front double A-arm suspensions, allowing you to easily swap between sliding king pin and double A-arm front ends.

•  Compatible with 24mm batteries, providing flexible power options and optimized weight distribution.

•  Ball differential engineered for ultra-smooth power delivery, precise throttle control, and long-lasting performance under the most demanding race conditions.

•  Premium components throughout, including high-quality hardware and precision-machined parts that ensure durability, consistency, and race-ready reliability.

Whether you’re chasing titles in 1/28 scale pan car racing or building the ultimate custom setup, the GX28 delivers the handling, tunability, and reliability that have made Reflex Racing a dominant force in mini and micro racing for years.

Reflex Racing — Where Winning DNA Meets Affordable Excellence.

Ready to take your racing to the next level? The GX28 is the platform you’ve been waiting for.

Dimensions:

• 98mm Wheelbase

• -145g-170g weight RTR Depending on body and Electronics

• 69mm to 78mm Rear Track Width

• 75mm to 79mm Front Track Width

Need to Complete:

• Body 

• Electronics

            Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with the Reflex Racing RRE007 Servo 20T Spline.  Additionally, the  AGFC A06CLS V1, the GL, the                  PN Anima and the Atomic Servo (it is a little bit of a tight fit but same sized spline)will fit as well.

****ELECTRONICS ARE NOT INCLUDED!!!

Pre Owned Team Powers 7000kv Sensored Motor - tested

Pre-Owned Rocket 3500 Sensored Motor - tested

NX-W-025 Nexx Racing Special Spacer (5pcs) 0.25mm

NX-PVB-4TI Nexx Racing Pivot Ball (5pcs) 3.5x4mm

NX-PVB-3TI Nexx Racing Pivot Ball (5pcs) 3.5x3mm

NX-ECLIP-1.5 Nexx Racing E-clip D1.5 (5pcs)