High quality carbon fiber T-plate for Kyosho Mini-Z MM chassis

Strength #3

We provide 4 levels of strength starting lowest strength #2 to highest strength #5.

High quality carbon fiber T-plate for Kyosho Mini-Z MM chassis

Strength #4

We provide 4 levels of strength starting lowest strength #2 to highest strength #5.

High quality carbon fiber T-plate for Kyosho Mini-Z MM chassis

Strength #5

We provide 4 levels of strength starting lowest strength #2 to highest strength #5.

SKYLINE CONSTRUCTION MANUAL – CLICK HERE->

Are you ready for a new open class; the supercharged mini-Z lipo class? NEXX RACING team is delighted to release a new lipo conversion chassis for Mini-Z 1:28 scale cars called the SKYLINE. The SKYLINE lipo conversion chassis is a conversion kit that takes all electronics of the mini-Z and converts the mini-Z from 4 x AAA ni-Mh batteres to 2 x lipo batteries version. With dual 2S lipo batteries, the mini-Z is like twin-power charged with much stronger power and also twice as long lasting race time.

The lipo batteries are mounted well balance on both sides of the frame with better stability in cornering.

Easy carbon fiber battery compartment door for easy installation and removal of batteries.

Top frame has empty spaces to allow multiple electronics mounting and extra weights to adjust C.G.

Total weight of car with dual 2s 350mAh batteries is only 140g, incredibly 10g lighter than stock car.

Compatible with NEXX V-LINE front suspension system and PN Racing Double A-Arm and most motor mounts on the market for 90-102mm Wide wheel base.

Recommended electronics:

ESC: PN, ENSOTECH, ATOMIC, GL, KYOSHO;
SERVO : Stock mini-Z servo gears and KYOSHO main board, PN RACING servo board, other servo boards that are taken off from micro servos…
MOTOR : All 1/28 motors on the market that fit your motor mount you are using.
BODY: can use plastic hard bodies or lexan bodies
CENTER SHOCK AND DAMPER: KYOSHO, NEXX, PN center shocks.
BATTERIES: GL Racing batteries, any 2s batteries that fits battery compartment 20x 40x 11.5mm

SKYLINE CONSTRUCTION MANUAL – CLICK HERE->

Are you ready for a new open class; the supercharged mini-Z lipo class? NEXX RACING team is delighted to release a new lipo conversion chassis for Mini-Z 1:28 scale cars called the SKYLINE. The SKYLINE lipo conversion chassis is a conversion kit that takes all electronics of the mini-Z and converts the mini-Z from 4 x AAA ni-Mh batteres to 2 x lipo batteries version. With dual 2S lipo batteries, the mini-Z is like twin-power charged with much stronger power and also twice as long lasting race time.

The lipo batteries are mounted well balance on both sides of the frame with better stability in cornering.

Easy carbon fiber battery compartment door for easy installation and removal of batteries.

Top frame has empty spaces to allow multiple electronics mounting and extra weights to adjust C.G.

Total weight of car with dual 2s 350mAh batteries is only 140g, incredibly 10g lighter than stock car.

Compatible with NEXX V-LINE front suspension system and PN Racing Double A-Arm and most motor mounts on the market for 90-102mm Wide wheel base.

Recommended electronics:

ESC: PN, ENSOTECH, ATOMIC, GL, KYOSHO;
SERVO : Stock mini-Z servo gears and KYOSHO main board, PN RACING servo board, other servo boards that are taken off from micro servos…
MOTOR : All 1/28 motors on the market that fit your motor mount you are using.
BODY: can use plastic hard bodies or lexan bodies
CENTER SHOCK AND DAMPER: KYOSHO, NEXX, PN center shocks.
BATTERIES: GL Racing batteries, any 2s batteries that fits battery compartment 20x 40x 11.5mm

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the miniZ more stable in any action.

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.

The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.

Brass Bottom Plate is designed to increase weight at the bottom of the SKYLINE lipo chassis to achieve lower C.G. , resulting better corner handling and less traction roll.

Weight: 26g

Material: Brass

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.