Finally a better choice of bearings for the GL line of cars. These bearings are ceramic and only have a shield on one side which gives you the least amount of friction. These bearings can be run dry or you can lubricate them.

This is the 8 bearing kit which is for the dif, rear axle and front wheels

GT-PCHAS-023

Finally here ProBuild brass chassis for the GL GT (not GTR) comes with Floating Pod mount (FPM)

*CHASSIS AND FPM ONLY

**WILL NOT WORK WITH THE REFLEX BATTERY HOLD DOWN

Heavy (5g) brass weight that is used under the rear pod on GL GLR and GT. in short this weight keeps the car flat and really stable in quick chicanes, increase rear grip. the team found it to be most effective in PAN car more than mod.

GLF-HLF1

In the GLF world we all have figured out that the brass chassis is just too heavy. yes it drives better and is stable but due to the weight it accelerates slow and lap time's are slower. On the flipside the stock carbon chassis is great but it has a tendency to traction roll when pushed especially on high grip. so using the same theory as our national championship winning GLR chassis we have come up with a new design that is heavier than the carbon but also wider which promotes stability without hindering acceleration! with this chassis you can push the car hard and run the stickier 21 fronts and not have to cut them down as much.

GLF2023WS

complete kit to update your GLF to world class performance!

• SIDE SPRINGS
• CENTER SPRINGS
• BODY POST
• UPPER DECK
• CANTILEVER
• ZS ORING AXLES
• FPM
• PIVOT BALL SPACER
• FPM ROLL CENTER SHIM
• RED CENTER SHOCK COLLAR
• RED CENTER SHOCK DROOP STOP

GLR-PCHASS-022

MWX-005

Finally here! This kit puts the center shock in the proper location. makes the car sharp and predictable and handles the bumps much better. This kits was used to get the quickest lap in pan car as well as P2 early 2021 at the PN nats, also the the fastest lap of the weekend at the 2021 Texas vs Cali challenge at RCHQ. And used on the Top Qualifier and fastest lap at the 2021 GL US nationals. so its pedigree is strong!

MWX-009

Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars

This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR

JMMA-23

MWX-008

Dry carbon and CNC machined weighted bumper system for lexan bodied 1/28 scale cars

This is one of the quickest and easiest way to tame down the steering of your Double A arm cars like the GL GT and the Reflex R28 but also work great for quick changes to even the MWX GLR

MWX-GL-PD-CER

MWX-R1V1-23

MWX 1/28 2WD RACING KIT (SLIDER)

• ULTRA LOW CG
• LOW SLOP DESIGN
• LOW ROLL CENTER FRONT SUSPENSION
• SERVO SAVER DELETE INCLUDED
• FLOATING SERVO MOUNT
• 4 WAY BATTERY WIRE LOCATION
• TRANSPONDER MOUNT INCLUDED
• KING PINS AND ALL SHAFTS ARE TITANIUM COATED
• ALL OPTION SPRINGS ARE INCLUDED
• UNIQUE NO SIDE LINK DESIGN
• HARD BODY AND LEXAN BODY REAR MOUNTS ARE INCLUDED
• fully enclosed PN GEAR DIF INCLUDED

WHEELS, TIRES, ELECTRONICS, BODY POST AND BODIES ARE NOT INCLUDED

AXLSHM-060

R1BBK-23

Convert your R.1 to Big Block Power! this kit is necessary to fit the MWX BBB (big block battery) it will not fit without these items!

V1C-BRS-23

CCP12

1 DEGREE OF CAMBER & 2 DEGREES OF TOE

CSPR-23V1

KPIN-019