RX533

Sturdy, good looking and lightweight, this bumper is perfect to mount the Rad Body Ocho Pan Car body. Compatible with our RX53Weight Balance Set.

RX28A-34

The all new 102mm wheelbase conversion kit fits all your flat plate versions of the RX28 release to date. It is designed to allow you to mount 102mm bodies like the Mazda 787B on the car for a more versatile experience (Kiss front end needs slight clearance sanded around upper arm area). The chassis was designed with versatility and light weight in mind. You can now use a larger 24mm battery or move the battery on the chassis forward by 4mm to fine tune your weight bias through the included extra holes on the chassis and battery stop.

The kit includes:

-RX28 102mm Hardened Steel Plate Chassis with Light Weight Cuts

-4mm Shock Cap Extender post and 1mm shim

-Battery Stop Post and Screw

-Body Side Clips (Tested on Maxda 787B only so far)

RX28A-18

RX28A-16

0.2mm laser cut caster shims to fine tune your caster in 2 degree increments.

RX28A-19

These 0.3mm caster shims can be used in combination with a 0.2mm shim to reduce the slop in your front end. Due to tolerance, sometimes a 0.2 with a 0.3 allows for less movement on the upper arms. The difference in caster is negligible, but we recommend using the towards the back.

RX28-068

RX28-051

RX28-019

Replacement 3.5MM Ball Cups

RX28-016

RX28A-28 

l-New 7075-T6 Adjustable Aluminum Upper Arms from Reflex Racing Allow you to fine tune the camber in the front of your RX28. Compatible with all cars, these arms use a turnbuckle and ball cup to adjust the camber of your car to suit track conditions.  

https://youtu.be/Jk_fJgMrN6Y

RX28A-59

Our Center shock is designed to be easy to adjust, light weight and lower maintenance than your "average" shock. The shock is made with premium components such as hard coated 7075 T6 Alloy Main Body and Titanium Nitride Coated Main Shaft.

With this shock design, droop can be adjusted by turning the lower spring perch or shock cap. Additionally, the enclosed grease chamber allows for longer time in between re-builds.

This main damper should work not only with our RX28 Kits, but also with the majority of 1/28 scale chassis out there.

The shock set comes with all 3 spring options (Black-soft, Silver-Medium, Gold-Hard).

We recommend Kyosho 30,000 grease inside the shock.

RX28A-29

Go longer between re-builds with these dust covers for your ball diff. Compatible only with the Reflex Racing V3 Spurs and beyond, these dust covers should work on the majority of diffs out there when using a Version 3 and beyond ball diff spur.

The set of dust covers adds about 1.6g of weight to the diff.

RX28-028

RX28A-38

Replacement front end for your RX28.

It includes:

-Bulkhead

-Upper and Lower Hinge Pins

-Gray (Hard Arms)

-RX28 Shock Set with Green Front Springs

-Front Shock Tower

-Necessary Hardware For Installation of all parts on the front end.

Required:

-Knuckles

-Front Axles

RX28A-37

These springs are in the same dimensions as the RX28 Double A Arm Front Springs. They are stiffer than the Gold springs and are good for Lower Roll Center Set Ups (when removing shims under the knuckle). These springs are also meant to be used in the rear of your Giulia Conversion kit from Reflex Racing.

The order of stiffness from less to most is :     GOLD>>>ORANGE>>>BLUE>>>RED

RX28A-36

These springs are in the same dimensions as the RX28 Double A Arm Front Springs. They are stiffer than the Gold springs and are good for Lower Roll Center Set Ups (when removing shims under the knuckle). These springs are also meant to be used in the rear of your Giulia Conversion kit from Reflex Racing.

The order of stiffness from less to most is :     GOLD>>>ORANGE>>>BLUE>>>RED

RX28-045G2

Version 2 molded A-Arms for your RX28. This is the G2 arm sets with dedicated left and right arms.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

-4 x 3.55 Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws

RX28-046G2

Version 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling. This listing includes the new Gen2 dedicated left and right arms.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

-4 x 3.55mm Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws