EasyLap Personal Transponder

Compact, lightweight, and ready to race straight out of the box. The EasyLap personal transponder comes housed in a blue case and installs easily onto your car in minutes. Its small profile keeps weight and bulk to a minimum — ideal for 1/28 scale and other mini RC classes where every gram counts.

Need a different look? The transponder can be removed from its case and swapped into any compatible colored case to match your style or help identify your car on track.

Mounting Note: For reliable lap detection, mount the transponder with the IR sensor facing directly upward toward your lap counting system.

Features:

• Compatible with EasyLap and Robitronic lap counter systems
• Compact low-profile design: 13mm (H) x 12mm (W) x 5mm (D)
• Removable case with support for colored case swaps
• Easy installation

Part Number: EZ001

EasyLap RC Lap Timing System — EZL02 USB Interface with Transponders

The EZL02 is EasyLap's complete plug-and-play lap timing solution for RC racing. Powered directly through USB with no external power supply required, the EZL02 is ready to run straight out of the box — just connect, install the free software, and start racing.

Designed for both indoor and outdoor tracks, the EZL02 supports unlimited cars via compact personal transponders, making it equally at home at a casual club night or a full race day event. The included multilanguage race software handles everything from practice sessions to full race day management.

What's in the Box:

• EZL02 USB main module
• 4 x IR sensors
• Sensor cable
• USB adapter cable
• 4 x personal transponders

Features:

• USB powered — no external power supply required
• Supports unlimited cars
• Compact personal transponders for easy car mounting
• Free multilanguage race management software included
• Suitable for indoor and outdoor track use
• Expandable with additional sensor modules (ET002)

Part Number: EZL02

EASYLAP MiniZ RWD Transponder Connector Cable (For Kyosho Mini-Z)

A dedicated plug-and-play connector cable for integrating an EASYLAP transponder directly into the Kyosho Mini-Z RWD chassis. No soldering required — connects to the receiver board or battery posts on the chassis for a clean, reliable installation.

Compatible with EASYLAP timing systems and designed specifically for Kyosho Mini-Z RWD models.

Specifications

• • Part Number: ET009-S
  • Compatibility: Kyosho Mini-Z RWD
  • Includes: (1) Transponder connector cable

I'm calling these "Stay Put Pegs", they can be used in strategic locations where the regular RCP rail pegs tend to back out.  They have "teeth" that keep them from backing out in addition to allowing a Phillips head (or flathead) screwdriver to tighten them.

Sold in Packs of 4.

EasyLap Timing Bridge Sensor Module — ET002 0.3m Cable

The ET002 Timing Bridge Sensor Module is EasyLap's dedicated detection module for use at the timing bridge. Compact and straightforward to install, it delivers the consistent, accurate transponder detection your race program depends on — whether you're running a permanent track setup or packing up for a race day away from home.

The included 0.3m cable keeps your bridge installation clean and tidy without unnecessary cable run.

Please Note: The ET002 is an add-on sensor module and is not a standalone timing solution. Operation requires the EasyLap EZL02 main module (or equivalent) and EasyLap timing software.

Features:

• Add-on timing bridge sensor module
• Consistent, reliable transponder detection
• Compact, low-profile design
• Easy bridge mounting and installation
• 0.3m connection cable included
• Suitable for permanent and portable track setups

Requirements:

• EasyLap EZL02 main module or equivalent
• EasyLap timing software

Part Number: ET002

EasyLap Micro Transponder with Blue Case, Power Wire and Connectors

The EasyLap Micro is an ultra-compact infrared transponder built for the smallest RC classes where space and weight are at a premium. Measuring just 10 x 9 x 4mm, it installs in minutes and sits low enough to virtually disappear on the car. Compatible with EasyLap and Robitronic lap counter systems.

The transponder slides out of its blue case and fits any compatible colored case, making it easy to match your livery or identify your car on track. Includes ESC power wire with 2, 3, and 4 prong connectors for broad compatibility.

Mounting Note: For reliable lap detection, mount the transponder with the IR sensor facing directly upward toward your timing system.

Specifications

• Dimensions: 10mm (H) x 9mm (W) x 4mm (D)
• Compatible systems: EasyLap, Robitronic
• Includes: Blue case, ESC power wire with 2, 3, and 4 prong connectors
• Part Number: EZ001X

28th Scale Motor Probe Kit

Get fast, reliable contact with your motor's power leads every time. The 28th Scale Motor Probe Kit is a precision 3-pin probe built for testing brushless motors with any motor tester on the market. Spring-loaded contacts let you easily make contact with the A/B/C phase leads with full control, so you can run your Kv, RPM, current, and timing checks quickly and repeat them just as easily on the next motor.

The kit ships unwired — solder on 22g wire to match your own motor tester, and you're ready to go.

Features:

• 3-pin spring-loaded probe for motor phase contact
• Compatible with any motor tester — just wire to your setup
• Works best with 22g wire
• Swappable pointed and flat probe tips for different contact needs
• Durable housing, fully serviceable

Includes:

• (1) 28th Scale Motor Probe body
• (3) Pointed-tip spring-loaded probes, plus (1) spare
• (3) Flat-tip spring-loaded probes, plus (1) spare
• Assembly screws

28SRA Tech Table Multi-Inspection Tool

One tool, four checks, zero arguments at tech.

This is the gauge that keeps every pit stop honest — wing height, tire diameter, and body width, all in a single piece, precision laser cut from clear 1/4" acrylic and built to survive a season of trackside abuse.

What it checks:

• Wing Height — Stock Class: 45mm max
• Wing Height — Modified Class: 50mm max
• Body Width: 83mm max
• Tire Diameter: 25.5mm max

No calipers, no guesswork, no "close enough." Set the chassis against the tool, and it's pass or fail — same standard whether you're racing in Apex or on the other side of the planet.

One tool to rule them all, one ruleset to bind them — no borders, no exceptions.