COLT End Bell — 30° Timing

Built for racers pushing boost and turbo timing setups, this end bell gives your ESC the extra room it needs to unlock that top-end pull. Same cast aluminum construction, same precision-bored center, same sealed bearing keeping your rotor spinning true, just dialed back to 30° to open up the timing window for setups that need it.

Fits both the COLT 25 (2500kv) and COLT 35 (3500kv), a drop-in swap, not a project. Comes with 3 new mounting screws, so you've got everything you need to bolt it on and go. If your ESC is calling for more timing space than stock allows, this is the end bell built to give it.

When your end bell takes a hit or just plain wears out, this is the replacement that gets you back on the track without missing a beat. Cast aluminum construction, precision-bored center, and a sealed bearing that keeps your rotor spinning true, race after race.

Built to factory spec, this end bell fits both the COLT 25 (2500kv) and COLT 35 (3500kv), a drop-in swap, not a project. Standard 40° timing, the setup most racers run stock. Bolt it on, plug it in, get back to business.

Silver Horse RC 2mm Bullet to JST Charging Adapter — 2S

Stop fumbling with incompatible connectors at the charging station. This Silver Horse RC Charging Adapter converts your charger's JST output to 2mm bullet connectors, giving you a clean, direct path to your 2S LiPo batteries — no soldering, no workarounds, no wasted bench time.

Built with 24AWG wire and gold-plated 2mm bullet connectors, this adapter is compact enough to toss in your pit bag and reliable enough to trust every session. Whether you're topping off between races or running a full charge cycle, the connection is solid and the fit is precise.

Features:

• JST input (charger side) to 2mm gold bullet output (battery side)
• Compatible with 2S LiPo batteries
• 24AWG wire construction
• Gold-plated 2mm bullet connectors for a secure, low-resistance connection
• Compact and lightweight — pit bag ready
• No soldering required

Compatible with chargers featuring a JST output, commonly used with 1/28th scale and micro RC vehicles.

Silver Horse RC Transmitter Bag

Silver Horse RC Transmitter Bag Store safe. Travel smart. Saddle up.

Your transmitter could be the most expensive thing you'll touch all weekend. Treat it like it.

The Silver Horse RC Transmitter Bag is built to keep your radio safe from the bumps, drops, and chaos of race-day travel. Padded stall walls absorb impact, and two internal dividers let you customize the fit around your transmitter — or double up as extra cushioning for a tighter, more protective pack. Heavy-duty zippers and reinforced carry points mean this bag holds up trip after trip, season after season.

Whether you run wheel or stick, it's a first-class stall for the gear that runs your steed.

Features:

• Padded stall walls shield your transmitter from impact and travel wear
• Two internal dividers — use as compartment separators or stack for extra padding
• Adjustable, removable shoulder strap for hands-free carry
• Dual top carry handles for grab-and-go convenience
• Heavy-duty zipper with red piping accent
• Clear interior pocket for cables and small items
• Branded Silver Horse RC panel

Internal Dimensions: 8.5″ H × 6.5″ W × 6″ D

Pairs with the Silver Horse Backpack for a complete RC travel solution — bring the whole stable with you. (Backpack sold separately.)

COLT 25 Low-End Torque Rotor

Gear down for maximum acceleration with this specialized rotor designed for technical racing scenarios. This rotor reduces your motor's KV rating by approximately 80KV from the RS2500 baseline while significantly boosting low-end torque and throttle response.

Ideal Applications:

• Shorter, Technical Tracks - Dominate tight layouts where corner exit speed matters more than top-end velocity
• 180-Degree Hairpins - Power out of sharp turns with authority and leave competitors in the dust
• Open Gearing Events - Take full advantage of gearing freedom to dial in the perfect balance between acceleration and speed

This rotor transforms your COLT 25 into a torque monster that punches hard off the line and through every corner. When the track demands snap over speed, swap in this rotor and feel the difference where it counts most—coming off the turns.

Perfect for racers who know: it's not how fast you're going, it's how fast you're accelerating.

COLT 25 High-Speed Rotor

Let it run with this high-velocity rotor engineered for fast, flowing track layouts. This rotor can increase your motor's KV rating by approximately 80KV over the RS2500 baseline, trading a bit of low-end torque for increased top speed and higher RPM potential.

Ideal Applications:

• Longer, Sweeping Tracks - Maximize straightaway speed and maintain momentum through flowing corner sequences
• High-Speed Circuits - Keep your machine charging hard where velocity wins races
• Tracks with Minimal Tight Turns - Perfect for layouts that reward sustained speed over aggressive acceleration

This rotor unleashes the COLT 25's full gallop, giving you the legs to run down competitors on fast tracks where top-end speed separates the leaders from the pack.

Performance Note: On some motor configurations, this rotor may push KV ratings slightly above 2800. Monitor motor temperatures and adjust gearing accordingly to keep your COLT running cool and reliable.

When the track opens up, open the throttle and let the COLT 25 fly.

Silver Horse RC COLT 35 - 3500KV Brushless Sensored Racing Motor - 1/28th Scale

Saddle up for high-speed micro-scale racing with the Silver Horse RC COLT 35, a 3500KV brushless sensored motor engineered specifically for 1/28th scale competition vehicles. This compact powerhouse delivers aggressive top-end power with the precision control to keep you pulling away from the pack.

Key Features:

Sensored Technology - Smooth, consistent acceleration and precise throttle control eliminate the cogging and inconsistency of sensorless systems. Experience responsive power right out of the gate, giving you the competitive edge on the track.

Replaceable Rotor System - Like a seasoned rider choosing the right tack for the trail, fine-tune your motor's performance characteristics with interchangeable rotors. Adjust timing and power delivery to match track conditions, racing class requirements, or your driving style. This innovative feature lets you optimize your setup without buying multiple motors—one COLT, endless configurations.

1410 Compact Design - Don't let the small size fool you—this COLT packs serious horsepower. Purpose-built for 1/28th scale chassis with a space-efficient footprint that doesn't compromise on performance.

Racing-Grade Construction - Built tough as a ranch workhorse to withstand the demands of competitive racing with high-quality components and precision manufacturing.

Whether you're blazing lap records or wrangling technical tracks, the Silver Horse RC COLT 35 gives you the speed and adjustability needed to gallop past the competition.

Ride with Silver Horse RC—Where Champions Are Born

Our bodies are made specifically for Silver Horse RC and they fit perfectly on Kyosho MR03, PN, Atomic, GL, and any other Mini-Z compatible chassis. The Sauber is a 102 mm body or as many call "LM." The paint is high gloss titanium silver and tested tough with months of racing and testing. The body weighs only 1.3 oz before the clips are installed. We do not mount the side clips so you can make height adjustments before you glue them into place.

The side clips can be placed in two positions, the standard height and lowered racing height, see the instruction video on our YouTube Channel for help!

Comes with two (2) side clips a nose mounting clip and the body.

Mini-Z fitting Aston Martin 98 mm body. It Fits MR03 and PN Chassis or any compatible Mini-Z chassis. Race ready and looks amazing on the shelf. Painted in high gloss hunter green. They come with a nose clip and are ready to glue on side clips for your own custom ride height preference.

Pictures show the body mounted on MR03 chassis with 98 MM motor pod, PN 10 spoke wheels, 03 offsets in front, and 02 offsets in the rear. This body meets all standard stock class racing hard auto scale body regulations.

Chassis and wheels not included, body 2 side clips and nose clip included.

The Silver Horse RC Pit Mat is built for 1/28th Mini-Z portability and convenience — whether you're trackside or setting up a quick workspace at home. Version 2 raises the bar with double the magnetic zones and a bonus 450°F heat-resistant solder mat that nests perfectly into the lower work area of the pit mat.

Pit Mat Dimensions: 13.5 x 9.75 inches

• Non-Slip Back
• Magnetic parts catchers (4) — double the V1!
• Tool and parts rail
• Includes 450°F heat-resistant silicone solder mat (6.75 x 5.75 inches) — nests into the lower work zone of the base mat
• Easily fits two cars and lots of parts
• Portable and easy to add to your track kit!

The wait for the best racing LM 102 body is over! Silver Horse RC has these bodies ready to paint and assemble to match your racing colors and style!

Kit includes everything shown to assemble your own custom C9! Unpainted body, front clip, side clips, window, wing assembly, accessories, and clear headlight covers

Fits Kyosho Mini-Z, MR03, PN, GL, Atomic, and all other 102mm Mini-Z mounting compatible

Show your Silver Horse RC team spirit with this Silver Horse RC 2 x 3 Flag! Has grommets on top for easy hanging and display.

RACE, WIN!, RECHARGE, and REPEAT!

Our AAA 800 mAh Racing Battery Pack is the perfect fuel for your Mini-z! These batteries have been tested for over a year and have been on the podium and winning races! The Silver Horse RC racing team has been setting lap records with these batteries, but not on the first lap, many times we have laid down the fastest lap after 40 laps! These batteries keep their punch and last the distance!