AC002-K

AC007-A

RAD006

RAD007

• (1) Medium center spring (Black) for RX28

• REFLEX RACING RX28 MEDIUM SOFT FRONT SPRINGS (BLACK)

REFLEX RACING RX28 SOFT FRONT SPRINGS (WHITE SILVER)

Linear springs are smoother in response than the standard springs. They are wound from smaller diameter wire and have less coils. This allows for the spring to have a more linear response through the suspension stroke. The front end tends to have a more constant response instead of getting more aggressive as the car rolls deeper; which is the case with the standard type springs. The Green Springs are similar in rate to the Kit Gold Springs (RX28A-12).

Servo Horn (20T) for 1/28 scale

RX28-045G2 (Black: Medium; Kit w/ 2 Upper & 2 Lower Arms, 4x Balls & 4x Screws)

This is a set of Full Ceramic Bearings for you 1/28 scale Pan Car.  Full Ceramic Bearings offer many benefits as outlined below:

1. Reduced Friction: They provide lower rolling resistance, which can improve the car's speed and overall efficiency.
   
2. Enhanced Durability: The wear-resistant nature of ceramic bearings means they can last longer under the high stress.
3. Lightweight: While not a lot, a full set of ceramics drops about 0.5g off your car.
   
4. Reduced Maintenance (somewhat): The low friction and wear properties eliminate the need for oil or grease. However, as our bearings have no races, they can allow more debris and tire dust to enter the bearings.
   
5. Corrosion Resistance: As they are not metallic, your bearings can be washed with something like dish soap and water.

Reflex Racing Medium Front Springs for 1/28 scale

RX28A-45 Reflex Racing RX28 Hard-Coated Aluminum Top Shock Shaft 

Shed some weight from up top for an even lighter CG.  This shaft sheds 0.3g from your top shock, leaving behind a 1.41g top shock.  When combined with the new aluminum turnbuckles, part no:  RX28A-44, it will shed 0.85g up top

Replacement Bands for your Reflex Racing Battery holder. 

Battery hold down band

T Bar for Reflex F1 Chassis

Carbon Fiber Motor Pod Plate

Carbon Fiber Tweak and Damping Plate