RX513V4

All New V4 Molded Spur and Covers.

Uses 2.381mm balls. This spur is compatible with most Mini-Z type ball differentials, but they do require a separate 4x7x2mm bearing.

RRE009-5

Made with tough PVC Sheathing, this ESC to receive link wire is more durable and shorter than std wires usually supplied with electronics. Up your wiring game and use this all black wire for the stealth look!

This set comes with 5 sets of wires. ESC Side plug is not installed. You must match the wire order to the oem wire supplied with your electronics.

RRE012: Reflex High-Performance Hard Case LiPo Battery for 1/28 Scale RC Models

Revolutionary Hard Case Design for Enhanced Performance

Reflex Racing introduces the industry's first hard case LiPo battery designed specifically for modern 1/28 scale RC chassis. This innovative battery delivers superior performance through advanced engineering and thoughtful design.

Key Benefits of Hard Case Technology

Improved Performance

• Reduced connection points, efficient plugs, and thicker wire lower internal resistance
• Enhanced current flow with minimal heat loss
• Higher voltage capacity (safely charges to 8.6V)
• Recommended charging rate: 1.0A

Better Wiring Solution

• Bullet-to-battery system creates significant space savings
• Ideal for low-profile bodies like Pan Car models
• Streamlined installation process

Enhanced Safety & Durability

• Prevents wire breakage at shrink wrap exit points
• Superior cell protection against impact damage
• Reduces risk of punctures and shorts from chassis contact

Technical Specifications

• Dimensions: 44.5 x 19.7 x 13mm
• Weight: 17g

Package Includes

• 1 Hard case LiPo battery pack
• 2 Gold bullet plugs

Compatible Charging Cable Sold Seperately

RRE014-5

These custom made 2mm split plugs by Reflex Racing are designed to be tougher and have less IR than other plugs available in the market. These plugs are manufactured to our strict specification, in order to solder better and have tougher soldering connections going to your battery, since the wires we use in 1/28 can be a bit fragile. In our signature, attention to detail style, we made a ridge on the top of the plug to make it easier to pull on a surface without having to yank on the wire.

RRE014

These custom made 2mm split plugs by Reflex Racing are designed to be tougher and have less IR than other plugs available in the market. These plugs are manufactured to our strict specification, in order to solder better and have tougher soldering connections going to your battery, since the wires we use in 1/28 can be a bit fragile. In our signature, attention to detail style, we made a ridge on the top of the plug to make it easier to pull on a surface without having to yank on the wire.

RRE017

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs. Durable, stylish and perfect length cables to help you tidy up your pit space!

RX603-30

All new from Reflex Racing is our brand new radial tires for RCP tracks. Through out testing in several spots across the USA we have found these tires to perform on par and often beyond the other offerings in the market. The feedback from both Pros and Joes is that these tires offer superior stability under rotation and great forward grip out of the corners.

The design of this tires was conceptualized so that the tire was not directional and instead of building a tread pattern on a slick, we actually cut into the slick to create a tread pattern. The result is a tread that flexes less for more stability under load and better exit traction. The compound was selected so that these tires still perform really well once the tread pattern has worn down well beyond being visible. In high traction conditions, this allows this tire to be used in smaller diameters, providing superior corner speed. Additionally we optimized the tire diameter for maximum corner speed and better rotation on the individual application. The 14mm tire is only 24.5mm in diameter, while the 11mm tire comes in at 25.25mm when mounted with super glue.

We recommend the 30 degree rear tires under most conditions. They work well in temps as low as 45 degrees (F) and perform well all the way into the 80's (F). If the grip is higher, simply cut the tire down smaller if you want a little more rotation in tight corners.

***Wheels are for picture only, they are not included***

RX602-30

All new from Reflex Racing is our brand new radial tires for RCP tracks. Through out testing in several spots across the USA we have found these tires to perform on par and often beyond the other offerings in the market. The feedback from both Pros and Joes is that these tires offer superior stability under rotation and great forward grip out of the corners.

The design of this tires was conceptualized so that the tire was not directional and instead of building a tread pattern on a slick, we actually cut into the slick to create a tread pattern. The result is a tread that flexes less for more stability under load and better exit traction. The compound was selected so that these tires still perform really well once the tread pattern has worn down well beyond being visible. In high traction conditions, this allows this tire to be used in smaller diameters, providing superior corner speed. Additionally we optimized the tire diameter for maximum corner speed and better rotation on the individual application. The 14mm tire is only 24.5mm in diameter, while the 11mm tire comes in at 25.25mm when mounted with super glue.

We recommend the 30 degree rear tires under most conditions. They work well in temps as low as 45 degrees (F) and perform well all the way into the 80's (F). If the grip is higher, simply cut the tire down smaller if you want a little more rotation in tight corners.

***Wheels are for picture only, they are not included***

RX605-45

All new from Reflex Racing is our brand new Low Profile slick tires for RCP tracks. These tires are made from a very tough and long lasting grippy rubber. They were developed to match the grip envelope of our 30 degree radials.

We recommend to mount the tires 1 of 2 ways:

For a less hassle, no truing method, mount on a Reflex Racing Speed Dish Wheel with a 22.6 plate. Let the tire break in over time. It is very long lasting, but the results are that the tire works after a couple of laps. If it is too aggressive in the middle of the corner, try removing some camber or running a softer front spring.

If you like to true your tires, mount them up on a truer and bring them down to 22.7-22.8mm and use with a 22.6 plate. After truing, the tires may be a little bit aggressive while they break in, so make sure you have some freshly skimmed 30 degree rear radials or you may have too much front bite. Since the material is very hard, we recommend running the tire truer where the tire and drum are spinning away from each other. With the PN Brand of truers, we find the most success running the truer in reverse and around 6v.

So when do you chose the 45 vs the 40? The 40 cuts a little bit harder, but it is smoother in the middle of the corner. Opposite is true for the 45. It really depends on what you are trying to do. If you want more middle and exit, use the 45. If you want smoother middle and exit, use the 40.

***Wheels are for picture only, they are not included***

RX532BL

The Wing Things are designed to make mounting your wing much easier. Install the screw from the bottom of the body and thread them into the wing thing threads. You can hold the wing thing with a 4.5mm hex wrench to fully tighten.

The total weight of the 2 wing things and 2 M2x4 is roughly 0.5g; about the same weight as using a couple of steel hex nuts and 6mm steel screws that are typically included in body sets.

RX28-045-1

Version 2 molded A-Arms for your RX28.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

RX532-BK

The Wing Things are designed to make mounting your wing much easier. Install the screw from the bottom of the body and thread them into the wing thing threads. You can hold the wing thing with a 4.5mm hex wrench to fully tighten.

The total weight of the 2 wing things and 2 M2x4 is roughly 0.5g; about the same weight as using a couple of steel hex nuts and 6mm steel screws that are typically included in body sets.

GL-RX-BOX

AC002-K

AC007-A

RAD006

RAD007

• (1) Medium center spring (Black) for RX28