RX28A-41 

This short steering horn is designed for high traction applications where your car is too edgy and you are looking for a slower steering feel. It is ideal for Pan Car and larger flowing tracks where you do not need as much steering throw. Due to the design of the shorter horn, you will only be able to achieve about 80% of the previous steering throw, so if you are using 85%+ Dual Rate, this is probably not the horn you want to use.  

RX28A-15

Optional Rear Upper Shock Mount. Allows for easy adjustment of the shock position. More forward provides more body roll and smoother steering. More Rearward is more aggressive and more forward traction.

RX28-046G2

Version 2 molded A-Arms for your RX28. These are the hard arms. Hard arms are better for higher bite conditions as they provide sharper mid corner steering while reducing traction rolling. This listing includes the new Gen2 dedicated left and right arms.

This set includes:

-2 x Upper Arms (Gray/Hard)

-2 x Lower Arms (Gray/Hard)

-4 x 3.55mm Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws

RX28-045G2

Version 2 molded A-Arms for your RX28. This is the G2 arm sets with dedicated left and right arms.

This set includes:

-2 x Upper Arms (Black/Medium)

-2 x Lower Arms (Black/Medium)

-4 x 3.55 Aluminum Pivot Balls

-2 x M2x6mm Screws

-2 x M2x8mm Screws

-2 x M1.2x5mm self tapping screws

-2 x M1.2x4mm self tapping screws

RX28A-29

Go longer between re-builds with these dust covers for your ball diff. Compatible only with the Reflex Racing V3 Spurs and beyond, these dust covers should work on the majority of diffs out there when using a Version 3 and beyond ball diff spur.

The set of dust covers adds about 1.6g of weight to the diff.

Servo Horn (20T) for 1/28 scale

RX28-045G2 (Black: Medium; Kit w/ 2 Upper & 2 Lower Arms, 4x Balls & 4x Screws)

This machined delrin horn for your FX28 offers the most direct steering feel, but the least protection for your servo.  For high competition racing, this is what we recommend.

Reverse Titanium Axles V2 – Adjustable Trackwidth System

Upgrade your front end with our V2 Reverse Axles, now machined from titanium for improved durability and long-lasting performance. These axles allow you to fine-tune your front offset by 1mm, adjustable in 0.5mm increments using the included M3 x 0.5mm axle shims.

Compatibility

• Reflex Racing RX28

• GL Racing chassis

• Atomic chassis

Why Reverse Thread?

By reversing the thread direction and using a screw instead of a nut, the axle system greatly reduces the chance of your front wheels snagging on RCP rails, especially when running low-offset wheels.

What’s Included

• 2× Titanium Reverse Axles (V2)

• 4× M3 x 0.5mm Copper Shims

• 2× M2 × 4mm Button Head Screws

Pro Tip

Depending on the wheels used, there may be a small amount of axial side-to-side play.
To eliminate this, you can lightly sand the outer axle surface to reduce the width slightly.

Sometimes it's the simple things that make us happy and this little tool does just that.  On one side with a spanner and another side a 0.9mm L bend Wire that allow you to adjust your upper arm and steering turnbuckles on your RX28 as well as your Ball Differential. 

GX28-006-04 Reflex Racing GX28 4 Degree Caster Bulkhead

GX28-006-03 Reflex Racing GX28 3 Degree Caster Bulkhead

GX28-006-02 Reflex Racing GX28 2 Degree Caster Bulkhead

Great way to add weight to your RX28 or FX28 on the lowest part of the chassis.  Install under the battery for additional stability..

Use this ball reamer on your pivots on you Reflex Cars to get super smooth movement.  

-1x M2x6 BH Screw (use M2x6 BH Screw plus M2 gold washer on top of top spring when installing 2 weights).

-1x M2 Gold Washer

-2x Black MD Spring (Soft)

-2x Silver MD Spring (Medium)

RX534 

The Reflex Racing mass damper set is designed to smooth out your 1/28 scale car by reducing the amplitude of vibration on the front end caused by the uneven nature of RCP Tracks. The mass damper is mounted on the ballast weight hole on any Reflex Racing carbon bumper or on the body clip posts of your RX511 Jomurema bumper. The result is a car that is smoother to drive and more controllable at high speed and through bumpy sections. Adjust the damper by using a different combination of weights.

Contents

• 3x 0.9g Tungsten Weights
• 1x 4mm aluminum post
• 2x M2x3 CS Screws

RX506