RRE015

All New from Reflex Racing is our 400mah LiHv battery. This battery offers longer runtime, lower IR and overall better performance for longer races vs the 340mah pack all while only weighing an extra 2g. This battery is slightly bigger so, it will only fit your RX28 when using the 24mm battery conversion kits or the 102mm WB Chassis. This battery will fit most AWDs car in the market as well as other cars that are capable of fitting a 24mm wide battery.

Why hardcase? Well, hardcase batteries have numerous benefits. Due to its design, a hardcase cuts down on connection points, uses more efficient plugs and thicker wire. These 3 elements drop the internal resistance of the entire circuit leading to better overall current flow, less heat loss and more performance. Couple that with the additional voltage capacity (these are safe to charge to 8.6v!) and the result is a sure fire winner.

The Benefit of having a battery that sits solidly in place on the chassis offers a handling advantage as there are no plugs and wires dangling inside the car. (Just think, we use 0.9g mass damper weights to stability our cars. Plugs and wires often represent more than this weight and they are jumping up and down inside the body of the car when using a soft case pack. ). The result is a car that behaves more smoothly. Additionally, hard case batteries simply wire better. In categories like Pan Car, where wiring is a bit tricky to fit under the low slung bodies, the hard case bullet to battery system opens up a tremendous amount of space under the body. 

Lastly, hard case batteries are also safer and tougher. Wires don't break at the exit of the shrink, so shorts are minimized and, the hard case also protects the cells from damage better, as well as isolates them from possible punctures or shorts caused by the chassis or impacts.

We recommend to charge the batteries at 1.0A

Dimensions:

44.5x24x12.5mm

Weight:  

19g

Includes:

1 battery pack

2 gold bullet plugs

You Can use Cable no:  RRE013 to charge. 

RX502

This is the all new GL RGT Rear Geometry Conversion Kit. Developed in house this kit was designed with our numerous years of experience designing 1/12 and 1/10 Pan Cars. The shock mounting postions and angles have been revised, the center of gravity has been dropped and the parts count and complexity have been reduced considerably. Additionally the integrated rear body mount position is compatible with most lexan bodies we have tested. The results are a car that produces more rear grip, better steering and more consistent, predictable handling. Having removed the motor mount shock mount extension also allows for easier wire routing for smoother pod movement and better airflow for the motor to stay cool.

Lap time wise we have seen resonable improvement, and consistency has gone through the roof! The car is much more composed under power and tracks far straighter. As another benefit, the time in between rear damper maintenance has been increased.

This kit includes the rear cross brace the aluminum tri mount to be installed on the stock motor mount. It is compatible with both the GL GLR rear shocks and PN Racing Side Shocks.

Needed to Complete:

-When using GLR Parts:

*GLR-S005 Plastic Shocks

*GLR-S016 Alloy Adjusters

*GLR-S021 Pivot Balls

*2 x M2 x 4mm BH Screws

*2 x M2 x 6mm Set Screws

*GLR-003-S Spring Set

(*alternatively, using Atomic 3.5mm Ball Studs simplifies the parts count AMZ-OP023, use 4 pcs of these plus 2x M2 nuts)

-When Using PN Racing Parts

*MR2162A Spring Set

*MR2990

*4 x M2 x 8mm BH Machine Screws

*2 x M2 Nut

RRE012: Reflex High-Performance Hard Case LiPo Battery for 1/28 Scale RC Models

Revolutionary Hard Case Design for Enhanced Performance

Reflex Racing introduces the industry's first hard case LiPo battery designed specifically for modern 1/28 scale RC chassis. This innovative battery delivers superior performance through advanced engineering and thoughtful design.

Key Benefits of Hard Case Technology

Improved Performance

• Reduced connection points, efficient plugs, and thicker wire lower internal resistance
• Enhanced current flow with minimal heat loss
• Higher voltage capacity (safely charges to 8.6V)
• Recommended charging rate: 1.0A

Better Wiring Solution

• Bullet-to-battery system creates significant space savings
• Ideal for low-profile bodies like Pan Car models
• Streamlined installation process

Enhanced Safety & Durability

• Prevents wire breakage at shrink wrap exit points
• Superior cell protection against impact damage
• Reduces risk of punctures and shorts from chassis contact

Technical Specifications

• Dimensions: 44.5 x 19.7 x 13mm
• Weight: 17g

Package Includes

• 1 Hard case LiPo battery pack
• 2 Gold bullet plugs

Compatible Charging Cable Sold Seperately

RX511

RX28A-01

This option rear pod plate is about 4g heavier than the stock one. It allows the rear end to be a little more stable and removes a little bit of rotation. We typically like to use this in Pan Car and Lexan classes, but it can be helpful in plastic body classes in low to mid traction conditions.

RX541

This bumper was developed to be in compliance with the 2024 PNWC Bumper Rules. The new requires there to be a 2mm gap between bumper and body if the bumper is made out of CF. This bumper retains the same shape as the RX528 Mako Bumper, but also has a nested, front TPU liner which satisfies the rule as the leading edge is now made from flexible, rubber like material (albeit, still super rigid).

This bumper is slightly heavier, but not by much. We recommend using CA to attach the bumper more securely to the CF part.

RRE020 

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RRE021

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

RRE017

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs. Durable, stylish and perfect length cables to help you tidy up your pit space!

RRE016

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs. Durable, stylish and perfect length cables to help you tidy up your pit space!

FX28 7075 T6 Aluminum Axle Carrier

Replacement pod plate for your G3 SE kit.  Has key holes for new pod, but will work with older versions.  

What we love about it?  We use it to break in tires, shape sidewalls, sand down super glue, all SUPER FAST.  It works with 2WD and AWD wheels.

GX28-005 Reflex Racing GX28 Body Locking Clips

These long links make the car smoother and easier to drive in high traction conditions. They can make the car less responsive.