Precision CNC Damper Post

Dimension: diameter = 3.19mm, length = 10mm

Compatible with all all NEXX Racing motor mounts and all springs on the market

Quantity: 1pc

New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount. It is designed for Kyosho MR02/03 both RTR kits and EVO kits with stock square motors.

Specifications:

• Weight: 5.8g (without T-plate)
• Designed for Kyosho Mini-Z 98 and 102mm MM chassis
• Fits all stock Kyosho square brushed and square brushless motors
• Fits both Kyosho and PN Racing square motors

Features:

?Lowest CG motor mount on the market

The new motor mount is designed for the stock square motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.

? Lightest motor mount on the market

Besides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with less than 6g in weight. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.

? Innovative slot design to allow easy adjusting gear mesh

Adjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.

? Innovative carbon support design

NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.

? Free carbon fiber T-plate

NEXX Racing motor mount also comes with a free high quality carbon fiber T-plate. Free of charge

? Free plastic damper posts

NEXX Racing motor mount also comes with 2 plastic damper posts free of charge. This plastic damper post is compatible with stock plastic Kyosho parts only. It may need some modification job to fit third party upgrade parts.

? Easy center shock height adjustment

NEXX Racing motor mount offers the ability to adjust the height of center shock.

The package includes:

• 1 x Precision CNC SWISS 7075 T6 aluminum motor mount
• 4 x eccentric bearing holders to allow height adjustment of the motor mount.
• 1 x Aluminum damper posts
• 1 x carbon fiber T-plate S#5 (strongest)

DESCRIPTION

New NEXX RACING precision CNC SWISS aluminum 7075 T6 motor mount is designed to replace stock plastic Kyosho Mini-Z motor mount and to support round brushless motors. It is designed for MR-03MMLM/ MR02MMLM/015 MMLM (wheelbase 98mm to 102mm LM). NEXX Racing motor mount is very light weight even more than 20% lighter than plastic version, yet very strong, made from aerospace aluminum 7075 T6

Specifications:

Weight: 5.4g (without T-plate)

Designed for Kyosho Mini-Z 98 and 102mm LM chassis ( 98mm to 102mm wheelbase LM ), 15mm round diameter brushless motors (Rocket, Ensotech, PN Racing, GL Racing, Atomic brushless motors ….)

Features:

Lowest CG motor mount on the market

The new motor mount is designed for the Mini-Z brushless motors. A lot of hours of engineering have been put into this motor to lower the C.G to lowest possible. You cannot go lower than this.

Lightest motor mount on the market

Besides being the lowest CG motor mount on the market, it is also the lightest weight motor mount on the market with just 5.1g in weight with carbon fiber T-plate and screws and only 5.4g without the carbon fiber T-plate, more than 20% lighter than stock plastic motor mount. To achieve this milestone, we have to machine the motor mount from a block of billet SWISS 7075 aluminum to minimize the number of parts, resulting the lightest weight possible.

Innovative slot design to allow easy adjusting gear mesh

Adjusting gear mesh is not always an easy job, however with NEXX innovative method of adjusting the gear mesh, it’s very simple, fool-proof one screw driver operation.

Innovative carbon support design

NEXX solves the problem of motors being ejected from crashes by a new method of lockup and hold the motor in secured position so that in hardest crashs, the motor cannot be ejected from the chassis.

Free carbon fiber T-plate

NEXX Racing motor mount also comes with a free high quality carbon fiber #5 T-plate. Free of charge

Free alu 7075-T6 damper posts

NEXX Racing motor mount also comes with alu damper posts free of charge.

Easy center shock height adjustment

NEXX Racing motor mount offers the ability to adjust the height of center shock.

The package includes:

1 x Precision CNC SWISS 7075 T6 aluminum motor mount

4 x eccentric bearing holders to allow height adjustment of the motor mount.

1 x alu damper post

1 x carbon fiber T-plate #5 (strongest)

Here's a rewritten and polished version of the ESC description:

Purpose-Built for 1/28th Scale Racing The Mini28 ESC combines advanced software and hardware specifically engineered for 1/28th scale competitive racing. With newly developed programmable parameters optimized for micro-scale performance, this ESC delivers championship-level control in the smallest package.

Compact & Lightweight Design Measuring just 22mm × 14mm and weighing only 5g, the Mini28 ESC is exceptionally compact. Its low-profile design facilitates easy soldering while minimizing unnecessary modifications—a critical advantage in 1/28th scale racing where every gram matters.

High Performance with Efficient Cooling The full-alloy heat sink provides exceptional thermal management, keeping operating temperatures in the optimal range even during aggressive driving. Peak output current reaches 30A, delivering impressive power for its size.

Dual Operating Modes The ESC offers two competition-ready modes:

• Zero-Timing ("Blinky") Mode – For spec racing classes requiring stock timing
• Modified Mode – Allows adjustable turbo timing for maximum performance in open classes

Championship-Proven Programming Featuring 26 adjustable parameters including PWM frequency, brake frequency, throttle curve, boost, turbo, and more, the Mini28 inherits its software architecture from Hobbywing's World Championship-winning XR10 Pro series. This extensive programmability enables precise tuning to match your driving style and track conditions. Warning: Incorrect settings may damage your motor and ESC. Always consult the manual before making changes.

Integrated High-Voltage BEC The built-in switching BEC delivers up to 8A peak current with selectable 6V or 7.4V output, providing ample power for modern high-torque digital servos.

Wireless Programming via Bluetooth Connect seamlessly with Hobbywing's OTA Bluetooth module and smartphone app for convenient parameter adjustment and firmware updates—no programming card required.

Technical Specifications:

• Application: 1/28th and 1/26th scale vehicles
• Continuous/Peak Current: 30A / 80A
• Motor Compatibility: Sensored and sensorless brushless motors up to 1626 size
• Battery Support: 2S LiPo
• BEC Output: 6V/7.4V adjustable, 3.5A peak (switch-mode)
• Dimensions: 22.7 × 14.2 × 11.8mm
• Weight: 5g (without wires)
• Programming: Via throttle cable port or OTA Bluetooth module

This RC receiver unit is FUTABA-SFHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

SBRC-B006

GLR-S026

RX28-059

RX600R3W

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

RX600F0W

All new from Reflex Racing is the Speed Dish Line of wheels. Designed with performance and durability in mind, these molded wheels have a 0.5mm outer ridge that matches the inner flange height of most 1/28 scale wheels. The result from this is a tire that is easier to glue (which we recommend) and also more stability to the tire in the case you prefer to use tape. Made from durable and tough glass reinforced nylon, these wheels are acetone safe so they can be re-used.

The Taller aspect of the wheel makes the sidewall effectively smaller in order to also aid in the increase of corner speed.

RX511

RX28SE-02

RX28-055-1

New G2 Ball Adjustable Upper arm replacements.

*Must use with RX28-044 2mm Turnbuckle set and/or RX28-042 2mm Ball Cups.

RX28-043

New G2 Turnbuckles with 2mm threads and double adjustment holes at 90* for easier toe in adjustment.

RX28-055