Silver Horse Blasting Bag

Race-Ready Thermal LiPo Charging and Storage Bag

Keep your batteries warm, contained, and ready to run.

Cold LiPos rob you of runtime and punch. The Blasting Bag keeps your packs at fighting temperature while they charge, so you're never waiting around for a sluggish battery to wake up — a small detail that makes a big difference in your pit setup.

FEATURES

• Active thermal warming — not just insulation. Built-in USB warmer actively heats your batteries while they charge.
• 3-stage LED heat indicator so you always know where you stand:
  • 🟢 Green — 90–94°F (45% Power)
  • 🔵 Blue — 95–99°F (75% Power)
  • 🔴 Red — 100–104°F (100% Power)
    (temperatures are estimated)
• Fire-safe construction — built to contain, not just carry.
• Dual wire access ports — charge without ever opening the bag, keeping your pit area clean and organized.
• Secure velcro chest-style closure — quick access, sealed tight.
• USB-C powered — plug in anywhere, no separate power supply needed.
• Compact, purpose-built footprint — sized for 1/28 scale packs, no wasted space in your pit box.

WHY IT MATTERS

A cold pack is a slow pack. The Blasting Bag keeps your batteries at optimal temperature through the charge cycle, so they're ready to deliver full power the second you hit the track — not ten minutes after you pull them off the charger.

And it does it safely. Fire-safe construction means peace of mind whether you're charging on the bench, in the pits, or in the trailer.

Built by racers, for racers — because a cold pack shouldn't cost you the race.

Specifications:

• Bag Dimensions: 4.75"W x 2.5"H x 3.5"D

What's In the Bag:

• 1× Silver Horse Blasting Bag
• 1× USB-C Cable

⚠️ Safety Notice: Never overcharge or overheat LiPo batteries. Always follow your battery manufacturer's recommended charge rate and temperature guidelines, and never leave charging batteries unattended.

Tagline: "A cold pack is a slow pack." / "Faster Lap Times Ahead"

Introducing our advanced threaded side wall, designed specifically for 1/28 Mini-Z racing cars. This innovative component eliminates the need for screws, offering a sleek and seamless look. Crafted from a special 30% carbon-fiber reinforced plastic, these side walls are engineered for optimal performance and durability. Their lightweight nature and robust construction ensure that they can withstand the rigors of high-speed driving and challenging terrains.

Features:

1. Special 30% Carbon-Fiber Reinforced Plastic:

• The side walls are made from a cutting-edge composite material that combines lightweight properties with exceptional strength. This ensures that they are both resilient and long-lasting, capable of enduring the demands of competitive racing and everyday use.

2. Super Lightweight:

• The use of carbon-fiber reinforced plastic results in a significantly lighter side wall, which contributes to the overall reduction in the weight of the RC car. This translates to improved acceleration, handling, and fuel efficiency.

3. Super Strong and Durable:

• Despite their lightweight nature, these side walls are incredibly strong and durable. The carbon-fiber reinforcement provides excellent resistance to impacts and wear, ensuring a long service life even under harsh conditions.

4. Easy Side Wall Replacement with Special Tools:

• The design includes a specialized tool that makes the installation and removal of side walls a breeze. This feature allows for quick and easy customization or replacement, saving valuable time and effort.

5. Eliminates the Need for Screws:

• By eliminating the need for screws, the threaded side walls provide a clean and streamlined appearance. This not only enhances the aesthetic appeal of the rims but also simplifies the assembly process, making it more user-friendly.

These threaded side walls are an ideal upgrade for any 1/28 Mini-Z racing enthusiast looking to enhance their vehicle’s performance, durability, and appearance. Whether for racing or casual driving, they offer a perfect blend of style and functionality.

Specifications:

• Weight: 0.1~0.3g/pcs
• Designed specifically for 1/28 Mini-Z racing cars

The package includes:

• 2 * side wall 20.4mm
• 2 * side wall 20.6mm
• 2 * side wall 20.8mm
• 2 * side wall 21.0mm
• 2 * side wall 21.2mm
• 2 * side wall 21.4mm
• 2 * side wall 21.6mm
• 2 * side wall 21.8mm
• 2 * side wall 22.0mm
• 2 * side wall 22.2mm

Introducing our specialized tool designed for the easy installation and removal of threaded side walls on 1/28 Mini-Z racing rims. Made from strong engineering plastic, this tool combines durability with ergonomic design, ensuring a comfortable grip during use. Its robust construction allows for precise handling and effortless adjustments, making the process of changing side walls quick and straightforward. This tool is an essential accessory for Nexx Racing EVO threaded side wall rims, providing both convenience and efficiency.

PSP Racing Lexan Roof – Reflex Racing MF-1 | 1:28

Give your Reflex Racing MF-1 ABS Plastic Body a weight-saving upgrade with the PSP Racing Lexan Roof. Built to shed grams up top and drop the car's center of gravity, it's a simple swap that pays off in handling.

Formed from 0.3mm Lexan and molded directly off the factory plastic window, it drops right in with a precise, factory-matched fit.

Where the stock plastic window adds unnecessary weight high on the chassis, this Lexan replacement is thinner and noticeably lighter — shifting mass downward for a car that feels more planted and responds quicker through transitions.

Features:

• 0.3mm Lexan construction
• Molded from the factory window for an accurate fit
• Lighter than the stock plastic part
• Lowers the car's center of gravity
• Sharpens stability and handling
• Clear finish

Compatibility & Installation:

• Built specifically for the Reflex Racing MF-1 ABS Plastic Body
• Requires trimming the stock plastic roof per the reference photos before the Lexan window installs

Specifications:

• Material: Lexan
• Color: Clear
• Thickness: 0.3mm
• Weight: 1.38g

Package Includes:

• 1× Uncut Lexan Window
• 1× Window Mask

GX28A-03 GX28 Front Suspension Springs - Medium (Silver)

GX28A-02 GX28 Front Suspension Springs - Soft (Black)

This part fits the following vehicles

• TC28

These long links make the car smoother and easier to drive in high traction conditions. They can make the car less responsive. 

Silver Horse RC Ride Height Gauges — SH0271

Every tenth of a millimeter matters when you're chasing the perfect setup. Our Ride Height Gauges take the guesswork out of the equation, giving you dead-accurate readings so your car sits exactly where you want it — every run, every track, every time.

This set pairs two gauges for complete coverage:

• Fine-range gauge — 1.0mm to 2.0mm in 0.1mm increments, for dialing in the lowest, most sensitive part of your ride height range.
• Double-sided gauge — covers 1.8mm to 4.0mm, with odd and even tenths split across the two faces for maximum accuracy across the higher end of your setup range.

Machined from durable composite with laser-etched markings that won't wear off in the pits, these gauges are built to survive raceday abuse and keep reading true, race after race.

What's included:

• Fine-range gauge (1.0–2.0mm, 0.1mm increments)
• Double-sided gauge (1.8–4.0mm, odd/even faces)

Dial it in. Race with confidence.

Full aluminum case micro servo for your micro r/c car, comes standard with soft silicon wire.

Feature:

• For: Mini RC 1/24 1/27 1/28
• Case Material: Aluminium
• Gear Material: Titanium
• Motor Type: Coreless

Specification:

• Operating voltage:4.8-8.4V
• Operating speed:                Stall torque:   
• 4.8V-0.072sec/60°                4.8V-2.0kgf.cm(28oz-in)
• 6.0V-0.065sec/60°                6.0V-2.2kgf.cm(31oz-in)
• 7.4V-0.055sec/60°                7.4V-2.5kgf.cm(35oz-in)
• 8.4V-0.050sec/60°                8.4V-3.0kgf.cm(42oz-in)
• Output Shaft :20T Φ3.5
• Weight:0.25oz
• Size: 2 x 1.9 x 0.8 cm
• Frequency:1520uS / 333Hz
• Bearing:Metal bearing
• Operating temperature:-15℃~+70℃
• Operating travel :≈180±10°
• Neutral position :1520μsec
• Frequency:1520uS / 333Hz
• Pules width range :500-2500μsec
• Dead band width:2μsec
• Connector wire length:60mm
• Waterproof level:Dust & Water Splash Resistacne

Include:

• Micro Sized Servo (1 pc)
• Servo Horns (3 pcs)
• Screws (3 pcs)

Optional softer springs for the front suspension on your Pixel Z1,  color coded for easy identification.

Feature:

• For: Pixel Z1
• Material: Steel
• Color: Gold/Silver

Include:

• Front Suspension Springs Silver 6.0T (2 pcs)
• Front Suspension Springs Gold 7.0T (2 pcs)

Original replacement part for the Xpress Pixel Z1 micro racing car!

Feature:

• For: Pixel Z1
• Material: Steel
• Color: Black

Include:

• Front Suspension springs 5.0T (2 pcs)

Original replacement part for the Xpress Pixel Z1 micro racing car!

Feature:

• For: Pixel Z1
• Material: Steel
• Color: Silver

Include:

• Steering Knuckle Axle (2 pcs)