• Electronic control: Precise motor speed regulation.

• Mini design: Compact and lightweight.

• 25A ESC: High performance speed controller.

• Parts & Accs: Reliable component for RC models.

• Without programmer box: Easy to install.

OMG-RAPIDO-25A Brushless ESC

The OMG-RAPIDO-25A is a lightweight, high-performance ESC designed for 1/18, 1/24, and 1/28 scale vehicles. With 10 programmable parameters, proportional linear braking, and a military-grade PCB capable of handling 25A continuous and 50A peak current, it delivers smooth throttle response and reliable power in a compact 9-gram package.

Built-in protections cover low voltage, overheating, failsafe, and stall scenarios. Compatible with all sensorless brushless motors 10.5T and above on 2S LiPo.

Specifications

Continuous/Peak Current: 25A / 50A

 Motor Support: Sensorless brushless, 10.5T minimum

 Battery: 2S LiPo BEC Output: 7.2V or 6.0V / 3A

Internal Resistance: 0.0025 ohm Dimensions: 27 x 19 x 8 mm

Weight: 9 g

Programmable Items: 10 Scale Compatibility: 1/18, 1/24, 1/28

OMG JST 1.5 To JR Plug Cable Connector

Length: 12.5 cm

Color: BLACK/RED (S/+/-) 

Quantity：1 PC

OMG-MT-AURORA-S2

Sensored brushless top motor for 1/27 and 1/28 Mini-Z RC Car

Suitable for rc RWD,FWD,etc vehicles.

Max Amps:8A

Max Voltage (V):<8.4

Resistance(Ω):0.74     

No-load Current(A):0.25

Continuous Power(W):80

Poles:2  

Max RPM:60000

Length of extend Shaft:10mm

Diameter Length(mm):Φ15X25mm

Shaft Diameter(mm):Φ2

Weight:17g

Micro size full metal coreless digital servo,fit for MiNI-Z,1/18,1/24/1/27,1/28 rc cars(DRZ V2,BMR-X,Drift Art2,WLtoys K989/969,Mini-Q,etc.)

Operating voltage:4.8-6.0V

Operating speed:              Stall torque:   

4.8V-0.070sec/60°             4.8V-1.6kgf.cm(22oz-in)

6.0V-0.065sec/60°             6.0V-1.8kgf.cm(25oz-in)

Gear material:Copper

Horn gear spline:25T Φ4.9

Size:0.79x0.44x0.87in

Case material:Full metal

Bearing:2BB

Motor type:Coreless

Operating temperature:-15℃~+70℃

Operating travel :≈180±10°

Neutral position :1520μsec

Frequency:1520uS

Refresh rate:333Hz

Pules width range :500-2500μsec

Dead band width:2μsec

Connector wire length:180mm

Waterproof level:Dust & Water Splash Resistacne

Programmable:No

The new OMG Gyro M3 was developed for the Mini-Z, Atomic DRZ and other micro drift cars in 1/24 scale. The driver can adjust the gain to the surface and track layout. There are 2 different modes, Normal Gain Mode and Sensitive Gain Mode.
In addition, the steering angle can be limited using the EPA and the direction of action can be changed!
The gain can be adjusted on the move from using channel 3 on the transmitter, it is also Futaba S.Bus and Sanwa SSR / SHR compatible!

Specification:

• Weight: 4g
• Dimension: 21*15*8.8mm
• Operating voltage: 3.7-8.4V
• Operating current: 20mA/6V
• Support the servo pulse width: 1520uS(50Hz&333Hz)
• Operating temperature range: -10℃+50℃
• Control system: PID control system
• Input & Output Plug: JST 1.5mm
• Sensor: Vibrating Gyro Sensor

OMG MT-AURORA-S2 Sensored Brushless Top Motor (1/27–1/28 Mini-Z RC Car)

Take your Mini-Z performance to the next level with the OMG MT-AURORA-S2 — a precision-engineered, sensored brushless motor designed for 1/27 and 1/28 scale RC cars. Perfect for RWD, FWD, and AWD setups, this motor delivers smooth throttle response and outstanding efficiency for serious racers.

⚙️ Specifications

• Motor Type: Sensored Brushless

• Scale Compatibility: 1/27 & 1/28 Mini-Z RC Cars

• Suitable for: RWD, FWD, AWD vehicles

• Poles: 2

• Weight: 17g

⚡ Performance

• kV Options: 2500KV 

• Max Amps: 8A

• Max Voltage: < 8.4V

• Resistance: 0.74Ω

• No-load Current: 0.25A

• Continuous Power: 80W

• Max RPM: 60,000

📏 Dimensions

• Motor Size: Φ15 × 25mm

• Shaft Diameter: 2mm

• Extended Shaft Length: 10mm

🎨 Color Options

• Black (BK)

• Red (RD)

• Purple/Violet (VT)

Upgrade your Mini-Z with the OMG MT-AURORA-S2 — engineered for speed, control, and performance.

Speed Controller for OMG-RAPIDO-20A & OMG-RAPIDO-45A OMG-ESC-P2

POLARIS DR-30A Sensored Brushless ESC (Electronic Speed Controller)

Take control of your RC car’s performance with the POLARIS DR-30A, a high-performance sensored brushless ESC engineered for precision drifting and racing. Compact, powerful, and fully tunable via Bluetooth and mobile app, this ESC delivers smooth throttle response and reliable output for 1/24th to 1/28th scale RC cars.

⚙️ Key Features

• Built-in Bluetooth for easy tuning

• APP Programming via mobile phone (Apple & Android)

• Supports firmware upgrades for future updates

• Compact and lightweight design — perfect for micro drift and race cars

• Available Colors: Red, Black, or Purple (VT)

📊 Specifications

• Model: OMG-POLARIS DR-30A

• Type: Sensored Brushless ESC

• Continuous Current: 30A

• Burst Current: 80A

• Input Voltage: 2–3S LiPo

• BEC Output: 6.0V / 2A

• Size (L×W×H): 23.5 × 13.7 × 9.8 mm

• Weight: 9.5g

• Waterproof: No

• Firmware Upgrade: Supported

• Programming Method: Mobile App (Apple & Android)

• Recommended For: 1/24, 1/27, and 1/28 drifting and racing RC cars

Fine-tune your performance anywhere — with the POLARIS DR-30A, experience next-level precision and control for your micro-scale RC builds.

OMG MINI 25A Brushless ESC w/ USB Programmer 1/24 - 1/18 RC Cars)

Unleash smooth, responsive power control with the OMG MINI 25A Electronic Brushless Speed Controller — engineered for 1/24 and 1/18 scale RC cars. Compact, durable, and efficient, this ESC provides reliable performance with advanced programmability via USB.

⚙️ Features

• Designed for 1/24 & 1/18 scale RC cars

• Includes USB programmer for easy setup and tuning

• Metal housing for superior heat dissipation and durability

• Compact and lightweight — perfect for micro racing builds

• Waterproof rating: IP67 (splash and dust resistant)

📊 Specifications

• Continuous Current: 25A

• Burst Current: 50A

• Input Voltage: 2–3S LiPo

• BEC Output: 6.0V / 3A

• Firmware Upgrade: Supported

• Waterproof Rating: IP67

• Size (L×W×H): 28.5 × 17.5 × 13 mm

• Weight: 13g

• Material: Metal

• Color: Black

📦 Included

• 1× OMG MINI 25A Electronic Brushless Speed Controller

• 1× USB Programmer

Compact, powerful, and smartly engineered — the OMG MINI 25A ESC is your go-to solution for smooth, efficient control in any small-scale RC car.

OMG-MT-AURORA-S2

Sensored brushless top motor for 1/27 and 1/28 Mini-Z RC Car

Suitable for rc RWD,FWD,etc vehicles.

kV options: 2500kv, 3500kv, 4500kv

Color Choices: Black (BK), Red (RD), Purple/Violet (VT)

Max Amps:8A

Max Voltage (V):<8.4

Resistance(Ω):0.74     

No-load Current(A):0.25

Continuous Power(W):80

Poles:2  

Max RPM:60000

Length of extend Shaft:10mm

Diameter Length(mm):Φ15X25mm

Shaft Diameter(mm):Φ2

Weight:17g

OMG MT-AURORA-S2 Sensored Brushless Top Motor (1/27–1/28 Mini-Z RC Car)

Take your Mini-Z performance to the next level with the OMG MT-AURORA-S2 — a precision-engineered, sensored brushless motor designed for 1/27 and 1/28 scale RC cars. Perfect for RWD, FWD, and AWD setups, this motor delivers smooth throttle response and outstanding efficiency for serious racers.

⚙️ Specifications

• Motor Type: Sensored Brushless

• Scale Compatibility: 1/27 & 1/28 Mini-Z RC Cars

• Suitable for: RWD, FWD, AWD vehicles

• Poles: 2

• Weight: 17g

⚡ Performance

• kV Options: 2500KV 

• Max Amps: 8A

• Max Voltage: < 8.4V

• Resistance: 0.74Ω

• No-load Current: 0.25A

• Continuous Power: 80W

• Max RPM: 60,000

📏 Dimensions

• Motor Size: Φ15 × 25mm

• Shaft Diameter: 2mm

• Extended Shaft Length: 10mm

🎨 Color Options

• Black (BK)

• Red (RD)

• Purple/Violet (VT)

Upgrade your Mini-Z with the OMG MT-AURORA-S2 — engineered for speed, control, and performance.

OMG MT-AURORA-S2 Sensored Brushless Top Motor (1/27–1/28 Mini-Z RC Car)

Take your Mini-Z performance to the next level with the OMG MT-AURORA-S2 — a precision-engineered, sensored brushless motor designed for 1/27 and 1/28 scale RC cars. Perfect for RWD, FWD, and AWD setups, this motor delivers smooth throttle response and outstanding efficiency for serious racers.

⚙️ Specifications

• Motor Type: Sensored Brushless

• Scale Compatibility: 1/27 & 1/28 Mini-Z RC Cars

• Suitable for: RWD, FWD, AWD vehicles

• Poles: 2

• Weight: 17g

⚡ Performance

• kV Options: 2500KV 

• Max Amps: 8A

• Max Voltage: < 8.4V

• Resistance: 0.74Ω

• No-load Current: 0.25A

• Continuous Power: 80W

• Max RPM: 60,000

📏 Dimensions

• Motor Size: Φ15 × 25mm

• Shaft Diameter: 2mm

• Extended Shaft Length: 10mm

🎨 Color Options

• Black (BK)

• Red (RD)

• Purple/Violet (VT)

Upgrade your Mini-Z with the OMG MT-AURORA-S2 — engineered for speed, control, and performance.