The DSB Center Shock is designed with double spring configuration with easy “one-hand” shock length and spring tension adjustment. Super easy and fast adjustment. DSB center shock intergrates precision bearings in the system to improve smoothness of operation allowing multi-direction movements helping the mini-Z more stable in any action.

Spare parts for NEXX RACING V-LINE front suspension system

Included: 2 x lock nuts and 2 x King Pin

Features:

Use for NX-274-S Nexx Racing Kyosho MR03W Mono Suspension (SILVER)

Upgrade for Kyosho MR03W stock suspension

Included :

• 4 x Radial Bearing 3x6x2.5mm
• 2 x Aluminum Washers 2x4x1
• 2 x Delrin Insert
• Shaft Size 3mm

Features:

Use for NX-274-R Nexx Racing Kyosho MR03W Mono Suspension (RED

Upgrade for Kyosho MR03W stock suspension

Included :

• 4 x Radial Bearing 3x6x2.5mm
• 2 x Aluminum Washers 2x4x1
• 2 x Delrin Insert
• Shaft Size 3mm

Features:

Use for NX-274-O Nexx Racing Kyosho MR03W Mono Suspension (ORANGE

Upgrade for Kyosho MR03W stock suspension

Included :

• 4 x Radial Bearing 3x6x2.5mm
• 2 x Aluminum Washers 2x4x1
• 2 x Delrin Insert
• Shaft Size 3mm

Features:

Use for NX-274-BL Nexx Racing Kyosho MR03W Mono Suspension (BLACK)

Upgrade for Kyosho MR03W stock suspension

Included :

• 4 x Radial Bearing 3x6x2.5mm
• 2 x Aluminum Washers 2x4x1
• 2 x Delrin Insert
• Shaft Size 3mm

Features:

Use for NX-274-B Nexx Racing Kyosho MR03W Mono Suspension (BLUE)

Upgrade for Kyosho MR03W stock suspension

Included :

• 4 x Radial Bearing 3x6x2.5mm
• 2 x Aluminum Washers 2x4x1
• 2 x Delrin Insert
• Shaft Size 3mm

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.