Included :

• 2 x Flat Hex Screws M2x3mm SS
• 6 x Button Hex M2x6mm SS

Description:

1. World’s First truely adjustable oil shock reservoir.
2. Scale 1/18 Shock Appearance & Performance.
3. High Precision CNC Machined Parts.
4. 56mm Extended Length, 40mm Collapsed Length.
5. Reservoir Shocks have fully functioning reservoir with a realistic divider piston with set screw for adjusting the shock rebound.
6. Easy to access bleed valve -adjustable spring preload.
7. Longer travel than stock with same compressed length.
8. High quality billet aluminum construction.
9. Inner o-ring/nylon ring/o-ring to prevent leaks.
10. Completely serviceable design -perfect for fine tuning your spring rate as well as dampening effect.
11. Fits for TRX-4M

( Anodized color: Black, Red, Gun Metal, Purple)

Description:

1. World’s First truely adjustable oil shock reservoir.
2. Scale 1/18 Shock Appearance & Performance.
3. High Precision CNC Machined Parts.
4. 56mm Extended Length, 40mm Collapsed Length.
5. Reservoir Shocks have fully functioning reservoir with a realistic divider piston with set screw for adjusting the shock rebound.
6. Easy to access bleed valve -adjustable spring preload.
7. Longer travel than stock with same compressed length.
8. High quality billet aluminum construction.
9. Inner o-ring/nylon ring/o-ring to prevent leaks.
10. Completely serviceable design -perfect for fine tuning your spring rate as well as dampening effect.
11. Fits for TRX-4M

( Anodized color: Black, Red, Gun Metal, Purple)

Description:
1. CNC ALU 7075 T6, smooth surface, durable and beautiful appearance
2. Easy to replace stock part
3. Satin anodized
( Anodized color: Black, Red, Silver, Gold)

Description:

1. CNC ALU 7075 T6, smooth surface, durable and beautiful appearance
2. Easy to replace stock part
3. Satin anodized
( Anodized color: Black, Red, Silver, Gold)

Description:
1. CNC ALU 7075 T6, smooth surface, durable and beautiful appearance
2. Easy to replace stock part
3. Satin anodized
( Anodized color: Black, Red, Silver, Gold)

This is a set of left and right precision CNC aluminum 7075 caster blocks C-hubs that is designed to improve the appearance, strength and specially better control for your FMS Max Smasher and FMS Power Wagon 1/24

Features :

• High quality Aluminum 7075 material.
• High precision, dimension control fit for stock part and also for Nexx Racing upgrade parts.
• Easy to install and provide superior strength compared to stock plastic parts or other aluminum parts.
• Perfect for replacement to the plastic stock part.
• Quantity: 2pcs (left and right) with hardware
• Anodized with red color
• Compatible with FMS FCX24 Power Wagon 1/24 and FMS Max Smasher Monster Truck

Nexx Tire Truer Mica Lid Plate Replacement Part.

Features:
– Clear as glass
– 4mm in thickness
– Extremely durable
– Replacement part for Tire Truer
– Material : Mica acrylic

Package Includes:
– x1 Mica Lid Plate

• Four pieces bearings 3x6x2.5mm .

Use for NX-265 NexxRacing Tire Truer For Mini-Z 2WD

NEXXRACING MR03W MONO SUSPENSION SYSTEM MANUAL

Features:

-Nexx Racing introduces new MR03W Mono suspension system.

-Designs based on full scale car model for realism.

-Replacement of stock suspension system.

-Provides better control of roll center and suspension geometry while travelling.

-Camper changes when cornering due to compression of suspension . This would allow the wheel to have maximum contact to road.

-Same width as stock (W).

-Same ride height as stock.

-Same steering bar as stock (toe 0 degree).

-Guarantees no steering pump as suspension travels.

-CNC 7075 Aluminium ball joints. During hard collison, joints would not be disassembled.

-Caster angle is +1° degrees.

-Adjustable camber angle from 0 – 1° degrees. ( without changing knuckle )

-3mm knuckle wheel shaft makes all car bearing are 3x6x2.5mm bearings.

-This suspension system would benefit your Mini-Z to be more stable when cornering and providing more road contact.

-Each part of the stock suspension system could be individually replaced by the parts in Nexx Racing MR03W Mono suspension system.

-Nexx Racing introduces a new design of Spoiler Set.
-Including a Spoiler A and a Spoiler B.
-Spoiler A weights approx. 1.9 grams and Spoiler B weights approx 2 grams.
-A slightly difference in downforce between Spoiler A and Spoiler B.
-Made with high quality ABS.
-Compatible for RC car model 1/28 Plastic Bodies and GT Lexan Bodies.
-Comes in three colours: Orange, Green and Black.

Package Includes:
-1 x Plastic Spoiler A.

-1 x Plastic Spoiler B.

-2 x Button Screw M2x5.

-2 x Nut M2