High-Quality CNC Titanium Pinion (Grade 5) for 1:28 Scale Remote Control Models

Manufactured through CNC machining on high-strength titanium (Grade 5), ensuring maximum durability and lightness.
Hole diameter: 2 mm, designed to universally fit most 1:28 motors.
Length: 9 mm, providing a larger contact surface with the gear for more stable and efficient transmission.
Optimized design for structural strength and weight reduction, enhancing overall vehicle performance.
The back of the pinion clearly indicates the number and pitch, making identification easier.

This CNC titanium pinion is the ideal solution for radio-controlled modeling enthusiasts seeking robust, lightweight, and high-precision components, guaranteeing high performance and long-term reliability.

High-Quality CNC Titanium Pinion (Grade 5) for 1:28 Scale Remote Control Models

Manufactured through CNC machining on high-strength titanium (Grade 5), ensuring maximum durability and lightness.
Hole diameter: 2 mm, designed to universally fit most 1:28 motors.
Length: 9 mm, providing a larger contact surface with the gear for more stable and efficient transmission.
Optimized design for structural strength and weight reduction, enhancing overall vehicle performance.
The back of the pinion clearly indicates the number and pitch, making identification easier.

This CNC titanium pinion is the ideal solution for radio-controlled modeling enthusiasts seeking robust, lightweight, and high-precision components, guaranteeing high performance and long-term reliability.

Marka Racing releases a new Lipo MRK-LI385 for 1:28

Marka batteries have been developed using the best modern technology available.

These batteries are submitted to the process of the selection as all Marka Racing batteries.

Specification

Voltage: 7.4V (2S)

Capacity: 385mAh

C-rate: 50C

Cable: 22Awg

Plug: JST-PH

Type: Rectangular

Size: 44 x 20 x 11.5mm (Length x Width x Height)

Weight: 18.7g

Marka Racing Lateral Sidewalls — 1:28 Mini-Z Scale

Tools Not Included with this set!

Marka Racing introduces a genuine innovation in 1:28 scale Mini-Z racing: lateral sidewalls engineered from the ground up to elevate both the appearance and performance of your build. The result of over six months of rigorous testing and refinement, these sidewalls represent a meaningful step forward for competitive and hobby-grade racing alike.

Screwless Design Unlike conventional sidewalls, Marka Racing's design eliminates the need for screws entirely. The result is a clean, aerodynamic profile that is as visually refined as it is functional — a detail that modeling enthusiasts and competitive racers will both appreciate.

Purpose-Built for Performance Manufactured from a specialized reinforced plastic that is both soft and flexible, these sidewalls absorb impacts and withstand the demands of intense racing without compromising structural integrity. Light enough to keep your build nimble, durable enough to last through extended use.

The Knife-Edge Profile The distinctive knife-shaped sidewall profile is the product of careful engineering. During development, the relationship between tip geometry and contact surface was analyzed extensively. A tip that is too narrow produces an overly directional car with limited slip control. A tip that is too wide increases the contact patch excessively, dulling steering response. The final profile strikes the ideal balance — delivering precise directional accuracy while preserving a measured degree of slip capability that proves invaluable in technical cornering situations.

Once mounted, the sidewalls increase the diameter of the wheel rim edge and noticeably improve cornering stability, giving the car a responsive, natural feel through every turn.

Effortless Installation and Removal Each kit includes two dedicated tools: one for precise mounting that ensures perfect adhesion and a clean finish, and one for clean removal when it is time to swap sizes. Using both tools together is recommended to ensure correct installation every time.

What's Included

• 10 lateral sidewalls in the following diameters: 23.4, 23.2, 23.0, 22.8, 22.6, 22.4, 22.2, 22.0, 21.8, and 21.6mm

Compatibility Designed to fit Marka Racing wheels exclusively. Compatible with 1:28 Mini-Z scale racing cars.

Tools Not Included with this set!

Marka Racing releases a new Lipo MRK-LI385 for 1:28

Marka batteries have been developed using the best modern technology available.

These batteries are submitted to the process of the selection as all Marka Racing batteries.

Specification

Voltage: 7.4V (2S)

Capacity: 385mAh

C-rate: 70C

Cable: 22Awg

Plug: JST-PH

Type: Rectangular

Size: 44 x 20 x 11.5mm (Length x Width x Height)

Weight: 18.7g

Marka Racing Lateral Sidewalls — 1:28 Mini-Z Scale

Marka Racing introduces a genuine innovation in 1:28 scale Mini-Z racing: lateral sidewalls engineered from the ground up to elevate both the appearance and performance of your build. The result of over six months of rigorous testing and refinement, these sidewalls represent a meaningful step forward for competitive and hobby-grade racing alike.

Screwless Design Unlike conventional sidewalls, Marka Racing's design eliminates the need for screws entirely. The result is a clean, aerodynamic profile that is as visually refined as it is functional — a detail that modeling enthusiasts and competitive racers will both appreciate.

Purpose-Built for Performance Manufactured from a specialized reinforced plastic that is both soft and flexible, these sidewalls absorb impacts and withstand the demands of intense racing without compromising structural integrity. Light enough to keep your build nimble, durable enough to last through extended use.

The Knife-Edge Profile The distinctive knife-shaped sidewall profile is the product of careful engineering. During development, the relationship between tip geometry and contact surface was analyzed extensively. A tip that is too narrow produces an overly directional car with limited slip control. A tip that is too wide increases the contact patch excessively, dulling steering response. The final profile strikes the ideal balance — delivering precise directional accuracy while preserving a measured degree of slip capability that proves invaluable in technical cornering situations.

Once mounted, the sidewalls increase the diameter of the wheel rim edge and noticeably improve cornering stability, giving the car a responsive, natural feel through every turn.

Effortless Installation and Removal Each kit includes two dedicated tools: one for precise mounting that ensures perfect adhesion and a clean finish, and one for clean removal when it is time to swap sizes. Using both tools together is recommended to ensure correct installation every time.

What's Included

• 10 lateral sidewalls in the following diameters: 23.4, 23.2, 23.0, 22.8, 22.6, 22.4, 22.2, 22.0, 21.8, and 21.6mm
• 1 assembly tool
• 1 removal tool

Compatibility Designed to fit Marka Racing wheels exclusively. Compatible with 1:28 Mini-Z scale racing cars.

Description

Marka Racing releases a new Lipo MRK-LI385 for 1:28

Marka batteries have been developed using the best modern technology available.

These batteries are submitted to the process of the selection as all Marka Racing batteries.

MRK-8025-05 (Lightweight/Race T=0.5)

Includes

• Lexan Body
• Lexan Wing
• 2 screws M2
• 2 Nut M2
• Window Mask Sheet
• Sticker Sheet

Marka 7.4V 455mAh 70C 2S LiPo Battery - Hard Case

Unleash the full potential of your 1/28th scale RC car with Marka's premium racing battery. Engineered using cutting-edge battery technology, this powerhouse delivers professional-level performance in a compact micro-scale package.

Professional-Grade Power for Micro Racing

Marka batteries represent the pinnacle of 1/28th scale power systems, developed specifically for competitive racing where every advantage counts. These aren't ordinary batteries—they're precision-engineered for racers who demand maximum performance, consistency, and reliability.

Key Features:

• 70C discharge rate provides explosive acceleration and sustained high-speed performance
• High voltage under load maintains consistent power delivery throughout the entire run
• Ultra-low internal resistance maximizes efficiency and runtime
• Hard-case construction protects against impacts and crashes in aggressive racing conditions
• 2mm gold plug ensures secure, low-resistance connection
• Optimized dimensions fit popular 1/28th scale platforms including Mini-Z and similar vehicles

Technical Specifications:

• Voltage: 7.4V (2S LiPo)
• Capacity: 455mAh
• Discharge Rate: 70C continuous
• Case Type: Hard-Case
• Connector: 2mm Gold Plug
• Shape: Rectangular
• Dimensions: 44.5 x 24.0 x 12.5mm (L x W x H)
• Weight: 21.5g

Why Choose Marka?

When lap times are measured in hundredths of a second, your battery can't be a compromise. Marka batteries deliver the voltage stability and discharge capability that competitive 1/28th scale racing demands, giving you the confidence to push your car to its limits lap after lap.

Top-level performance for serious racers.

To mount the Lexan bodies on the Mini-Z MR03/PN 2.5 chassis you need to purchase the kit produced by PN Racing with code 600800K,
which is not included.

MRK-8043-07

*Does not come painted! Body is clear.