GMM-002-SD6000KV

GL Racing Sensored Brushless Motor (1PC)

GL Racing Sensored Brushless Motor 8800KV (1pc)

GL Racing 2500KV Sensorless Motor 

GL-TS004

Easily adjust the length of steering link or camber link

GL Racing V1.2 ESC - Made by HobbyWing - Used, tested - Receiver wire plug cut off

GL's v2 front tires come pre-trued to approx 23mm. All you need to do it scrub them in and race!

GL-BT-ESC-060

GL-BT-ESC-060 (without Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car

Change to 32-bit MCU with ultra-smooth, faster response with precise throttle,brake and reverses control.

. Support ~2.5A BEC ampere drawn which is raised up by ~70%.

. Support ~30A instant ampere drawn by the motor which is raised up by ~80%.

. Bluetooth Module for advanced programming and firmware update through the Mobile APPS.

. APPS will be available on both IOS and Android.

. Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing).

Software:

. It is a new developed software with more advanced item functions added

. Each item have small step to fine tune.

Specs:

Battery Input Voltage: 2S lipo

BEC: 6V/2.5A

1/28 motor Limit: 9000kv or below

Max Ampere draw: ~30A per phase

Size: ~23.8x14.0x8.7mm(not include the plug)

Weight: ~5.6g(without any wire installed)

rear lexan body mount for GL

GL-RIDER-014

GL-TS002

GL-0162-TG

1. It is with alloy case and titanium gears

2. It is ultra smooth compared with other servo of this size and provides a more precise feel in car handling

3. It is for direct upgrade of GLA V1 stock servo （DES 131) and it is perfectly fit for GLA V1 or GLA V2 servo mount .(Not compatible with GLA V2.1 servo mount)

4. If user of GLA V2 wish to try its smooth feel, GLA V1 or GLA V2 servo mount is needed and to be purchased separately

5.Compatible with GLA servo saver set(GLA025)

Features:

Full alloy casing

Titanium gears

Bearing

Speed 0.05sec/60 @6.0V

Torque:2.30kg cm @6.0V

Weight 9.27g

For GLR-GLA-V2.1,GLF-1 & GL-RiderFeatures:
Full alloy casing
Titanium gears
Bearing
Speed 0.05sec/60 @6.0V
Torque:1.50kg cm @6.0V
Weight 7g

GL-Drift-OP-003-0

GL-Drift-OP-003-1

GL-Drift-OP-003-2